Hi Bjorn,
On 6/8/2019 9:02 AM, Bjorn Andersson wrote:
> On Wed 05 Jun 10:15 PDT 2019, Sricharan R wrote:
>
>> This patch adds support for the global clock controller found on
>> the ipq6018 based devices.
>>
>> Signed-off-by: Sricharan R <sricha...@codeaurora.org>
>> Signed-off-by: anusha <anusha...@codeaurora.org>
>> Signed-off-by: Abhishek Sahu <abs...@codeaurora.org>
>
> Please fix your s-o-b chain, as described in my reply to 1/8..
>
ok.
>> ---
>> drivers/clk/qcom/Kconfig | 9 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/gcc-ipq6018.c | 5267
>> ++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 5277 insertions(+)
>> create mode 100644 drivers/clk/qcom/gcc-ipq6018.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index e1ff83c..e5fb091 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -120,6 +120,15 @@ config IPQ_GCC_8074
>> i2c, USB, SD/eMMC, etc. Select this for the root clock
>> of ipq8074.
>>
>> +config IPQ_GCC_6018
>
> Please maintain sort order.
>
ok.
>> + tristate "IPQ6018 Global Clock Controller"
>> + depends on COMMON_CLK_QCOM
>> + help
>> + Support for global clock controller on ipq6018 devices.
>> + Say Y if you want to use peripheral devices such as UART, SPI,
>> + i2c, USB, SD/eMMC, etc. Select this for the root clock
>> + of ipq6018.
>> +
>> config MSM_GCC_8660
>> tristate "MSM8660 Global Clock Controller"
>> help
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index f0768fb..025137d 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -22,6 +22,7 @@ obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
>> obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
>> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
>> obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
>> +obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
>
> Ditto.
>
ok.
>> obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
>> obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
>> obj-$(CONFIG_MDM_LCC_9615) += lcc-mdm9615.o
>> diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c
> [..]
>> +static int gcc_ipq6018_probe(struct platform_device *pdev)
>> +{
>> + return qcom_cc_probe(pdev, &gcc_ipq6018_desc);
>> +}
>> +
>> +static int gcc_ipq6018_remove(struct platform_device *pdev)
>> +{
>> + return 0;
>
> Just omit .remove from the gcc_ipq6018_driver instead of providing a
> dummy function.
>
ok.
>> +}
>> +
>> +static struct platform_driver gcc_ipq6018_driver = {
>> + .probe = gcc_ipq6018_probe,
>> + .remove = gcc_ipq6018_remove,
>> + .driver = {
>> + .name = "qcom,gcc-ipq6018",
>> + .owner = THIS_MODULE,
>
> Don't specify .owner in platform drivers.
>
ok.
> [..]
>> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ6018 Driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:gcc-ipq6018");
>
> This modalias won't be used.
>
ok. But it looks to be there in other clk drivers as well.
Regards,
Sricharan
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
Code Aurora Forum, hosted by The Linux Foundation
