On Tue, 2019-04-30 at 20:58 +0200, Nicolas Saenz Julienne wrote: > Some hardware configurations might pass on providing an interrupt line. > In that case there is always the option to use a polled input approach. > This patch adapts the driver for it. > > The polled approach is only triggered if no interrupt is provided by the > firmware or platform data. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulie...@suse.de> > ---
Ping :)
> drivers/input/touchscreen/edt-ft5x06.c | 100 ++++++++++++++++++-------
> 1 file changed, 72 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c
> b/drivers/input/touchscreen/edt-ft5x06.c
> index 702bfda7ee77..e58645c72c2f 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -39,6 +39,7 @@
> #include <linux/gpio/consumer.h>
> #include <linux/input/mt.h>
> #include <linux/input/touchscreen.h>
> +#include <linux/input-polldev.h>
> #include <linux/of_device.h>
>
> #define WORK_REGISTER_THRESHOLD 0x00
> @@ -97,6 +98,7 @@ struct edt_reg_addr {
> struct edt_ft5x06_ts_data {
> struct i2c_client *client;
> struct input_dev *input;
> + struct input_polled_dev *poll_dev;
> struct touchscreen_properties prop;
> u16 num_x;
> u16 num_y;
> @@ -181,9 +183,8 @@ static bool edt_ft5x06_ts_check_crc(struct
> edt_ft5x06_ts_data *tsdata,
> return true;
> }
>
> -static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
> +static void edt_ft5x06_process(struct edt_ft5x06_ts_data *tsdata)
> {
> - struct edt_ft5x06_ts_data *tsdata = dev_id;
> struct device *dev = &tsdata->client->dev;
> u8 cmd;
> u8 rdbuf[63];
> @@ -210,7 +211,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void
> *dev_id)
> break;
>
> default:
> - goto out;
> + return;
> }
>
> memset(rdbuf, 0, sizeof(rdbuf));
> @@ -222,7 +223,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void
> *dev_id)
> if (error) {
> dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
> error);
> - goto out;
> + return;
> }
>
> /* M09/M12 does not send header or CRC */
> @@ -232,11 +233,11 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void
> *dev_id)
> dev_err_ratelimited(dev,
> "Unexpected header: %02x%02x%02x!\n",
> rdbuf[0], rdbuf[1], rdbuf[2]);
> - goto out;
> + return;
> }
>
> if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
> - goto out;
> + return;
> }
>
> for (i = 0; i < tsdata->max_support_points; i++) {
> @@ -273,11 +274,23 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void
> *dev_id)
>
> input_mt_report_pointer_emulation(tsdata->input, true);
> input_sync(tsdata->input);
> +}
>
> -out:
> +static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
> +{
> + struct edt_ft5x06_ts_data *tsdata = dev_id;
> +
> + edt_ft5x06_process(tsdata);
> return IRQ_HANDLED;
> }
>
> +static void edt_ft5x06_poll(struct input_polled_dev *dev)
> +{
> + struct edt_ft5x06_ts_data *tsdata = dev->private;
> +
> + edt_ft5x06_process(tsdata);
> +}
> +
> static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
> u8 addr, u8 value)
> {
> @@ -1059,7 +1072,9 @@ static int edt_ft5x06_ts_probe(struct i2c_client
> *client,
> const struct i2c_device_id *id)
> {
> const struct edt_i2c_chip_data *chip_data;
> + struct input_polled_dev *poll_dev = NULL;
> struct edt_ft5x06_ts_data *tsdata;
> + bool polled = !(client->irq);
> struct input_dev *input;
> unsigned long irq_flags;
> int error;
> @@ -1112,15 +1127,38 @@ static int edt_ft5x06_ts_probe(struct i2c_client
> *client,
> msleep(300);
> }
>
> - input = devm_input_allocate_device(&client->dev);
> - if (!input) {
> - dev_err(&client->dev, "failed to allocate input device.\n");
> - return -ENOMEM;
> + if (polled) {
> + poll_dev = devm_input_allocate_polled_device(&client->dev);
> + if (!poll_dev) {
> + dev_err(&client->dev,
> + "failed to allocate polled input device.\n");
> + return -ENOMEM;
> + }
> +
> + poll_dev->poll = edt_ft5x06_poll;
> + poll_dev->private = tsdata;
> +
> + tsdata->poll_dev = poll_dev;
> + tsdata->input = poll_dev->input;
> +
> + input = poll_dev->input;
> +
> + device_property_read_u32(&client->dev, "poll-interval",
> + &poll_dev->poll_interval);
> +
> + } else {
> + input = devm_input_allocate_device(&client->dev);
> + if (!input) {
> + dev_err(&client->dev,
> + "failed to allocate input device.\n");
> + return -ENOMEM;
> + }
> +
> + tsdata->input = input;
> }
>
> mutex_init(&tsdata->mutex);
> tsdata->client = client;
> - tsdata->input = input;
> tsdata->factory_mode = false;
>
> error = edt_ft5x06_ts_identify(client, tsdata, fw_version);
> @@ -1167,26 +1205,32 @@ static int edt_ft5x06_ts_probe(struct i2c_client
> *client,
>
> i2c_set_clientdata(client, tsdata);
>
> - irq_flags = irq_get_trigger_type(client->irq);
> - if (irq_flags == IRQF_TRIGGER_NONE)
> - irq_flags = IRQF_TRIGGER_FALLING;
> - irq_flags |= IRQF_ONESHOT;
> -
> - error = devm_request_threaded_irq(&client->dev, client->irq,
> - NULL, edt_ft5x06_ts_isr, irq_flags,
> - client->name, tsdata);
> - if (error) {
> - dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
> - return error;
> - }
> -
> error = devm_device_add_group(&client->dev, &edt_ft5x06_attr_group);
> if (error)
> return error;
>
> - error = input_register_device(input);
> - if (error)
> - return error;
> + if (polled) {
> + error = input_register_polled_device(poll_dev);
> + if (error)
> + return error;
> + } else {
> + irq_flags = irq_get_trigger_type(client->irq);
> + if (irq_flags == IRQF_TRIGGER_NONE)
> + irq_flags = IRQF_TRIGGER_FALLING;
> + irq_flags |= IRQF_ONESHOT;
> +
> + error = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL, edt_ft5x06_ts_isr,
> irq_flags,
> + client->name, tsdata);
> + if (error) {
> + dev_err(&client->dev, "Unable to request touchscreen
> IRQ.\n");
> + return error;
> + }
> +
> + error = input_register_device(input);
> + if (error)
> + return error;
> + }
>
> edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
> device_init_wakeup(&client->dev, 1);
signature.asc
Description: This is a digitally signed message part
