On Wed, 2019-06-12 at 12:03 -0700, Raj, Ashok wrote:
> On Wed, Jun 12, 2019 at 12:58:17PM -0600, Alex Williamson wrote:
> >
> > On Wed, 12 Jun 2019 11:41:36 -0700
> > sathyanarayanan kuppuswamy <sathyanarayanan.kuppusw...@linux.intel.com>
> > wrote:
> >
> > >
> > > On 6/12/19 11:19 AM, Alex Williamson wrote:
> > > >
> > > > On Wed, 12 Jun 2019 10:06:47 -0700
> > > > sathyanarayanan.kuppusw...@linux.intel.com wrote:
> > > >
> > > > >
> > > > > From: Kuppuswamy Sathyanarayanan
> > > > > <sathyanarayanan.kuppusw...@linux.intel.com>
> > > > >
> > > > > Commit 975bb8b4dc93 ("PCI/IOV: Use VF0 cached config space size for
> > > > > other VFs") calculates and caches the cfg_size for VF0 device before
> > > > > initializing the pcie_cap of the device which results in using
> > > > > incorrect
> > > > > cfg_size for all VF devices > 0. So set pcie_cap of the device before
> > > > > calculating the cfg_size of VF0 device.
> > > > >
> > > > > Fixes: 975bb8b4dc93 ("PCI/IOV: Use VF0 cached config space size for
> > > > > other VFs")
> > > > > Cc: Ashok Raj <ashok....@intel.com>
> > > > > Suggested-by: Mike Campin <mike.cam...@intel.com>
> > > > > Signed-off-by: Kuppuswamy Sathyanarayanan
> > > > > <sathyanarayanan.kuppusw...@linux.intel.com>
> > > > > ---
> > > > >
> > > > > Changes since v1:
> > > > > * Fixed a typo in commit message.
> > > > >
> > > > > drivers/pci/iov.c | 1 +
> > > > > 1 file changed, 1 insertion(+)
> > > > >
> > > > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > > > > index 3aa115ed3a65..2869011c0e35 100644
> > > > > --- a/drivers/pci/iov.c
> > > > > +++ b/drivers/pci/iov.c
> > > > > @@ -160,6 +160,7 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int
> > > > > id)
> > > > > virtfn->device = iov->vf_device;
> > > > > virtfn->is_virtfn = 1;
> > > > > virtfn->physfn = pci_dev_get(dev);
> > > > > + virtfn->pcie_cap = pci_find_capability(virtfn, PCI_CAP_ID_EXP);
> > > > >
> > > > > if (id == 0)
> > > > > pci_read_vf_config_common(virtfn);
> > > > Why not re-order until after we've setup pcie_cap?
> > > >
> > > > https://lore.kernel.org/linux-pci/20190604143617.0a226...@x1.home/T/#
> > >
> > > pci_read_vf_config_common() also caches values for properties like
> > > class, hdr_type, susbsystem_vendor/device. These values are read/used in
> > > pci_setup_device(). So if we can use cached values in
> > > pci_setup_device(), we don't have to read them from registers twice for
> > > each device.
> >
> > Sorry, I missed that dependency, a bit too subtle. It's still pretty
> > ugly that pci_setup_device()->set_pcie_port_type() is the canonical
> > location for setting pcie_cap and now we need to kludge it earlier.
> > What about the question in the self follow-up to my patch in the link
> > above, can we simply assume 4K config space on a VF? Thanks,
>
> There should be no issue simply reading them once? I don't know
> what that exact optimization saves, unless some broken VFs didn't
> actually expose all the capabilities in config space and this happens
> to workaround the problem.
The original patch was to save time when you have hundreds of VFs in the systemÂ
and doing this for each one of them is just a waste of time.
>
> + Karim
>
> Cheers,
> Ashok
Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Ralf Herbrich
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879
