On Fri, Jun 07, 2019 at 11:50:36AM +0200, Geert Uytterhoeven wrote: > Enable compile-testing for all Renesas interrupt controller drivers, > except for RENESAS_H8300H_INTC. The latter relies on a function > (ctrl_bclr()) that is not available on other architectures. > > Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Reviewed-by: Simon Horman <horms+rene...@verge.net.au> > --- > drivers/irqchip/Kconfig | 20 ++++++++++++++++---- > 1 file changed, 16 insertions(+), 4 deletions(-) > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > index 2d3b5a27cc988ab6..fe509b88f99a8f10 100644 > --- a/drivers/irqchip/Kconfig > +++ b/drivers/irqchip/Kconfig > @@ -217,17 +217,26 @@ config RDA_INTC > select IRQ_DOMAIN > > config RENESAS_INTC_IRQPIN > - bool > + bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST > select IRQ_DOMAIN > + help > + Enable support for the Renesas Interrupt Controller for external > + interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs. > > config RENESAS_IRQC > - bool > + bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST > select GENERIC_IRQ_CHIP > select IRQ_DOMAIN > + help > + Enable support for the Renesas Interrupt Controller for external > + devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs. > > config RENESAS_RZA1_IRQC > - bool > + bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST > select IRQ_DOMAIN_HIERARCHY > + help > + Enable support for the Renesas RZ/A1 Interrupt Controller, to use up > + to 8 external interrupts with configurable sense select. > > config ST_IRQCHIP > bool > @@ -303,8 +312,11 @@ config RENESAS_H8300H_INTC > select IRQ_DOMAIN > > config RENESAS_H8S_INTC > - bool > + bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST > select IRQ_DOMAIN > + help > + Enable support for the Renesas H8/300 Interrupt Controller, as found > + on Renesas H8S SoCs. > > config IMX_GPCV2 > bool > -- > 2.17.1 >
