On 10/06/2019 18:45, Martin Blumenstingl wrote:
> The interrupt line of the RTL8211F PHY is routed to the GPIOZ_14 pad.
> Describe this in the device tree so the PHY framework doesn't have to
> poll the PHY status.
>
> Signed-off-by: Martin Blumenstingl <[email protected]>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> index 0d9ec45b8059..8c9535880007 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> @@ -190,6 +190,10 @@
> reset-assert-us = <10000>;
> reset-deassert-us = <10000>;
> reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW |
> GPIO_OPEN_DRAIN)>;
> +
> + interrupt-parent = <&gpio_intc>;
> + /* MAC_INTR on GPIOZ_14 */
> + interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
>
[ 13.505835] RTL8211F Gigabit Ethernet 0.0:00: attached PHY driver [RTL8211F
Gigabit Ethernet] (mii_bus:phy_addr=0.0:00, irq=26)
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5
...
26: 3 0 0 0 0 0
meson-gpio-irqchip 26 Level 0.0:00
...
Acked-by: Neil Armstrong <[email protected]>
Tested-by: Neil Armstrong <[email protected]>
