Hello !, This is second version of patch set containing following patches for Cadence ethernet controller driver.
1. 0001-net-macb-add-phylink-support.patch Replace phylib API's with phylink API's. 2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch This patch add support for SGMII mode. 3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch This patch is to configure TI PHY DP83867 in SGMII mode from our MAC PCI wrapper driver. With this change there is no need of PHY driver and dp83867 module must be disabled. Users wanting to setup DP83867 PHY in SGMII mode can disable dp83867.ko driver, else dp83867.ko overwrite this configuration and PHY is setup as per dp83867.ko. 4. 0004-net-macb-add-support-for-c45-PHY.patch This patch is to support C45 PHY. 5. 0005-net-macb-add-support-for-high-speed-interface This patch add support for 10G USXGMII PCS in fixed mode. Since emulated PHY used in fixed mode doesn't seems to support anything above 1G, additional parameter is used outside "fixed-link" node for selecting speed and "fixed-link" node speed is still set at 1G. 6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding New parameters added to Cadence ethernet controller DT binding for USXGMII interface. Regards, Parshuram Thombare Parshuram Thombare (6): net: macb: add phylink support net: macb: add support for sgmii MAC-PHY interface net: macb: add PHY configuration in MACB PCI wrapper net: macb: add support for c45 PHY net: macb: add support for high speed interface net: macb: parameter added to cadence ethernet controller DT binding .../devicetree/bindings/net/macb.txt | 4 + drivers/net/ethernet/cadence/Kconfig | 2 +- drivers/net/ethernet/cadence/macb.h | 136 +++- drivers/net/ethernet/cadence/macb_main.c | 659 ++++++++++++++---- drivers/net/ethernet/cadence/macb_pci.c | 225 ++++++ 5 files changed, 860 insertions(+), 166 deletions(-) -- 2.17.1
