Hi All, Please ignore patches sent in-reply chain to patch 0001. Sending all patches in reply to patch 0000-cover-letter.patch.
Regards, Parshuram Thombare >-----Original Message----- >From: Parshuram Thombare <pthom...@cadence.com> >Sent: Sunday, June 16, 2019 5:15 AM >To: and...@lunn.ch; nicolas.fe...@microchip.com; da...@davemloft.net; >f.faine...@gmail.com >Cc: net...@vger.kernel.org; hkallwe...@gmail.com; linux- >ker...@vger.kernel.org; Rafal Ciepiela <raf...@cadence.com>; Anil Joy >Varughese <anil...@cadence.com>; Piotr Sroka <pio...@cadence.com>; >Parshuram Raju Thombare <pthom...@cadence.com> >Subject: [PATCH 0/6] net: macb patch set cover letter > >Hello !, > >This is second version of patch set containing following patches for Cadence >ethernet controller driver. > >1. 0001-net-macb-add-phylink-support.patch > Replace phylib API's with phylink API's. >2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch > This patch add support for SGMII mode. >3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch > This patch is to configure TI PHY DP83867 in SGMII mode from > our MAC PCI wrapper driver. > With this change there is no need of PHY driver and dp83867 > module must be disabled. Users wanting to setup DP83867 PHY > in SGMII mode can disable dp83867.ko driver, else dp83867.ko > overwrite this configuration and PHY is setup as per dp83867.ko. >4. 0004-net-macb-add-support-for-c45-PHY.patch > This patch is to support C45 PHY. >5. 0005-net-macb-add-support-for-high-speed-interface > This patch add support for 10G USXGMII PCS in fixed mode. > Since emulated PHY used in fixed mode doesn't seems to > support anything above 1G, additional parameter is used outside > "fixed-link" node for selecting speed and "fixed-link" > node speed is still set at 1G. >6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding > New parameters added to Cadence ethernet controller DT binding > for USXGMII interface. > >Regards, >Parshuram Thombare > >Parshuram Thombare (6): > net: macb: add phylink support > net: macb: add support for sgmii MAC-PHY interface > net: macb: add PHY configuration in MACB PCI wrapper > net: macb: add support for c45 PHY > net: macb: add support for high speed interface > net: macb: parameter added to cadence ethernet controller DT binding > > .../devicetree/bindings/net/macb.txt | 4 + > drivers/net/ethernet/cadence/Kconfig | 2 +- > drivers/net/ethernet/cadence/macb.h | 136 +++- > drivers/net/ethernet/cadence/macb_main.c | 659 ++++++++++++++---- > drivers/net/ethernet/cadence/macb_pci.c | 225 ++++++ > 5 files changed, 860 insertions(+), 166 deletions(-) > >-- >2.17.1
