Hi Olivier
On 6/11/19 1:45 PM, Olivier Moysan wrote:
Add identification registers to address range
of SAI DT parent node, for stm32mp157c.
Change-Id: I696363794fab59ba8d7869b3ffbc041dacdf28de
Signed-off-by: Olivier Moysan <olivier.moy...@st.com>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi
b/arch/arm/boot/dts/stm32mp157c.dtsi
index e98aad37ff9e..0c4e6ebc3529 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
Applied on stm32-next. Next time, don't forget to remove your gerrit
changeID please.
Thanks.
Alex
@@ -746,7 +746,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4400a000 0x400>;
- reg = <0x4400a000 0x4>;
+ reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI1_R>;
status = "disabled";
@@ -778,7 +778,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4400b000 0x400>;
- reg = <0x4400b000 0x4>;
+ reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI2_R>;
status = "disabled";
@@ -809,7 +809,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4400c000 0x400>;
- reg = <0x4400c000 0x4>;
+ reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI3_R>;
status = "disabled";
@@ -1164,7 +1164,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50027000 0x400>;
- reg = <0x50027000 0x4>;
+ reg = <0x50027000 0x4>, <0x500273f0 0x10>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI4_R>;
status = "disabled";
