17.06.2019 8:09, Bitan Biswas пишет:
> Remove BUG, BUG_ON as it makes system usable:
> - Remove redundant BUG_ON calls or replace with WARN_ON_ONCE
> as needed.
> - Remove BUG() and mask Rx interrupt similar as Tx
> for message fully sent case.
> - Add caller error handling and WARN_ON_ONCE check for non-zero
> rx_fifo_avail in tegra_i2c_empty_rx_fifo() after all processing.
The commit message should describe motivation of the change and not the change
itself,
unless it's some additional information which is required for better
understanding of
the code.
In yours case it could be something like that:
The usage of BUG() macro is generally discouraged in kernel, unless
it's a problem that results in a physical damage or loss of data.
This patch removes unnecessary BUG() macros and replaces the rest
with a warnings.
> Signed-off-by: Bitan Biswas <bbis...@nvidia.com>
> ---
> drivers/i2c/busses/i2c-tegra.c | 45
> ++++++++++++++++++++++++++++++++++--------
> 1 file changed, 37 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 4dfb4c1..b155b61 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -73,6 +73,7 @@
> #define I2C_ERR_NO_ACK BIT(0)
> #define I2C_ERR_ARBITRATION_LOST BIT(1)
> #define I2C_ERR_UNKNOWN_INTERRUPT BIT(2)
> +#define I2C_ERR_RX_BUFFER_OVERFLOW BIT(3)
>
> #define PACKET_HEADER0_HEADER_SIZE_SHIFT 28
> #define PACKET_HEADER0_PACKET_ID_SHIFT 16
> @@ -515,7 +516,11 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev
> *i2c_dev)
> * prevent overwriting past the end of buf
> */
> if (rx_fifo_avail > 0 && buf_remaining > 0) {
> - BUG_ON(buf_remaining > 3);
> + /*
> + * buf_remaining > 3 check not needed as rx_fifo_avail == 0
> + * when (words_to_transfer was > rx_fifo_avail) earlier
> + * in this function.
> + */
> val = i2c_readl(i2c_dev, I2C_RX_FIFO);
> val = cpu_to_le32(val);
> memcpy(buf, &val, buf_remaining);
> @@ -523,7 +528,15 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev
> *i2c_dev)
> rx_fifo_avail--;
> }
>
> - BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
> + if ((!(i2c_dev->msg_buf_remaining)) &&
The RX FIFO shall be drained completely no matter what.
Hence why the "i2c_dev->msg_buf_remaining" checking is needed here?
Secondly, in the future please don't add parens where they are not needed. In
this
case parens around !i2c_dev->msg_buf_remaining are not needed at all.
> + WARN_ON_ONCE(rx_fifo_avail))
> + return -EINVAL;
> +
> + /*
> + * buf_remaining > 0 at this point can only have rx_fifo_avail == 0
The rx_fifo_avail is always 0 at this point, including the case of
buf_remaining == 0.
It will be better if you'll add a comment for the WARN_ON_ONCE(rx_fifo_avail)
above,
saying that RX FIFO must be fully drained, and then just drop this comment.
> + * as this corresponds to (words_to_transfer was > rx_fifo_avail)
> + * case earlier in this function.
> + */
> i2c_dev->msg_buf_remaining = buf_remaining;
> i2c_dev->msg_buf = buf;
[snip]
