On 06/20/2019 08:22 PM, Vignesh Raghavendra wrote:

> Add binding documentation for TI's HyperBus memory controller present on
> AM654 SoC.
> 
> Signed-off-by: Vignesh Raghavendra <[email protected]>
> ---
> 
> v7: Fix example to move HyperBus node out of syscon
> v6: Use generic names for bindings
> 
>  .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 52 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt 
> b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
> new file mode 100644
> index 000000000000..d424a0b88ab6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
[...]
> +Example:
> +
> +     system-controller@47000000 {
> +             compatible = "syscon", "simple-mfd";
> +             reg = <0x0 0x47000000 0x0 0x100>;
> +             #address-cells = <2>;
> +             #size-cells = <2>;
> +             ranges;
> +
> +             hbmc_mux: multiplexer {
> +                     compatible = "mmio-mux";
> +                     #mux-control-cells = <1>;
> +                     mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */
> +             };
> +

   Empty line not needed here.

> +     };
> +
> +     hbmc: hyperbus@47034000 {
> +             compatible = "ti,am654-hbmc";
> +             reg = <0x0 0x47034000 0x0 0x100>,
> +                     <0x5 0x00000000 0x1 0x0000000>;
> +             power-domains = <&k3_pds 55>;
> +             #address-cells = <2>;
> +             #size-cells = <1>;
> +             ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
> +                      <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
> +             mux-controls = <&hbmc_mux 0>;
> +
> +                     /* Slave flash node */

   Overindented.

> +             flash@0,0 {
> +                     compatible = "cypress,hyperflash", "cfi-flash";
> +                     reg = <0x0 0x0 0x4000000>;
> +             };
> +     };
[...]

MBR, Sergei

Reply via email to