[PATCH 3/4] ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1

[Christophe Kerello]

This patch enables FMC2 NAND controller used on stm32mp157c-ev1.

Signed-off-by: Christophe Kerello <christophe.kere...@st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts 
b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index feb8f77..9ab25da 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -157,6 +157,22 @@
        };
 };
 
+&fmc {
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&fmc_pins_a>;
+       pinctrl-1 = <&fmc_sleep_pins_a>;
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       nand@0 {
+               reg = <0>;
+               nand-on-flash-bbt;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+};
+
 &i2c2 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c2_pins_a>;
-- 
1.9.1