IS25LP256 gets BFPT_DWORD1_ADDRESS_BYTES_3_ONLY from BFPT table for address width. But in actual fact the flash can support 4-byte address. Use a post bfpt fixup hook to overwrite the address width advertised by the BFPT.
Suggested-by: Tudor Ambarus <[email protected]> Signed-off-by: Liu Xiang <[email protected]> --- Changes in v4: update the comment suggested by Tudor. --- drivers/mtd/spi-nor/spi-nor.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 73172d7..ce153c4 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1687,6 +1687,28 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) .flags = SPI_NOR_NO_FR | SPI_S3AN, static int +is25lp256_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + /* + * IS25LP256 supports 4B opcodes, but the BFPT advertises a + * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width. + * Overwrite the address width advertised by the BFPT. + */ + if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) == + BFPT_DWORD1_ADDRESS_BYTES_3_ONLY) + nor->addr_width = 4; + + return 0; +} + +static struct spi_nor_fixups is25lp256_fixups = { + .post_bfpt = is25lp256_post_bfpt_fixups, +}; + +static int mx25l25635_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, const struct sfdp_bfpt *bfpt, @@ -1827,7 +1849,8 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) SECT_4K | SPI_NOR_DUAL_READ) }, { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_4B_OPCODES) }, + SPI_NOR_4B_OPCODES) + .fixups = &is25lp256_fixups }, { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128, -- 1.9.1
