Hello Rob,

> Document the device tree binding for the cluster clock controllers found
> in the Armada 7K/8K SoCs.
>
> Signed-off-by: Gregory CLEMENT <gregory.clem...@bootlin.com>

Did you have the opportunity to have a look on this binding ? I think
that I completely follow your requirement now.

Thanks,

Gregory

> ---
>  .../arm/marvell/ap806-system-controller.txt   | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git 
> a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt 
> b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> index 7b8b8eb0191f..4a3bb9c12312 100644
> --- 
> a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> +++ 
> b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> @@ -143,3 +143,28 @@ ap_syscon1: system-controller@6f8000 {
>               #thermal-sensor-cells = <1>;
>       };
>  };
> +
> +Cluster clocks:
> +---------------
> +
> +Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
> +cluster contain up to 2 CPUs running at the same frequency.
> +
> +Required properties:
> +- compatible: must be  "marvell,ap806-cpu-clock";
> +- #clock-cells : should be set to 1.
> +- clocks : shall be the input parents clock phandle for the clock.
> +- reg: register range associated with the cluster clocks
> +
> +
> +ap_syscon1: system-controller@6f8000 {
> +     compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
> +     reg = <0x6f8000 0x1000>;
> +
> +     cpu_clk: clock-cpu@0 {
> +             compatible = "marvell,ap806-cpu-clock";
> +             clocks = <&ap_clk 0>, <&ap_clk 1>;
> +             #clock-cells = <1>;
> +             reg = <0x274 0xa30>;
> +     };
> +};
> -- 
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Reply via email to