On 2019-06-25 10:05, [email protected] wrote: > From: Eugen Hristev <[email protected]> > > Add binding specification for analogic filter inside the i2c controller
s/analogic/the analog/ > Signed-off-by: Eugen Hristev <[email protected]> > --- > Documentation/devicetree/bindings/i2c/i2c-at91.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt > b/Documentation/devicetree/bindings/i2c/i2c-at91.txt > index 8268595..20d334c 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt > @@ -23,6 +23,9 @@ Optional properties: > - enable-dig-filt: Enable the built-in digital filter on the i2c lines, > specifically required depending on the hardware PCB/board and if the > version of the controller includes it. > +- enable-ana-filt: Enable the built-in analogic filter on the i2c lines, > + specifically required depending on the hardware PCB/board and if the > + version of the controller includes it. > - Child nodes conforming to i2c bus binding > > Examples : > @@ -60,6 +63,7 @@ i2c0: i2c@f8034600 { > atmel,fifo-size = <16>; > i2c-sda-hold-time-ns = <336>; > enable-dig-filt; > + enable-ana-filt; Perhaps microchip,digital-filter; microchip,analog-filter; ? Cheers, Peter > > wm8731: wm8731@1a { > compatible = "wm8731"; >
