On Fri, May 31, 2019 at 12:27:47PM +0200, Thomas Bogendoerfer wrote: > Starting with SGI Origin machines nearly every new SGI ASIC contains > an 1-Wire master. They are used for attaching One-Wire prom devices, > which contain information about part numbers, revision numbers, > serial number etc. and MAC addresses for ethernet interfaces. > This patch adds a master driver to support this IP block. > It also adds an extra field dev_id to struct w1_bus_master, which > could be in used in slave drivers for creating unique device names. > > Signed-off-by: Thomas Bogendoerfer <tbogendoer...@suse.de> > --- > drivers/w1/masters/Kconfig | 9 +++ > drivers/w1/masters/Makefile | 1 + > drivers/w1/masters/sgi_w1.c | 130 > +++++++++++++++++++++++++++++++++++ > include/linux/platform_data/sgi-w1.h | 15 ++++ > include/linux/w1.h | 2 + > 5 files changed, 157 insertions(+) > create mode 100644 drivers/w1/masters/sgi_w1.c > create mode 100644 include/linux/platform_data/sgi-w1.h
Evgeniy, are the patches ok for you or is there something to improve ? It would be good, if they could get upstream during the next merge window, as there are other patches from me depedning on them. Thanks, Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
