On Tue, 21 May 2019, Paul Cercueil wrote:
> This driver will provide a regmap that can be retrieved very early in
> the boot process through the API function ingenic_tcu_get_regmap().
>
> Additionally, it will call devm_of_platform_populate() so that all the
> children devices will be probed.
>
> Signed-off-by: Paul Cercueil <p...@crapouillou.net>
> ---
>
> Notes:
> v12: New patch
>
> drivers/mfd/Kconfig | 8 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ingenic-tcu.c | 113 ++++++++++++++++++++++++++++++++
> include/linux/mfd/ingenic-tcu.h | 8 +++
> 4 files changed, 130 insertions(+)
> create mode 100644 drivers/mfd/ingenic-tcu.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 294d9567cc71..a13544474e05 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -494,6 +494,14 @@ config HTC_I2CPLD
> This device provides input and output GPIOs through an I2C
> interface to one or more sub-chips.
>
> +config INGENIC_TCU
> + bool "Ingenic Timer/Counter Unit (TCU) support"
> + depends on MIPS || COMPILE_TEST
> + select REGMAP_MMIO
> + help
> + Say yes here to support the Timer/Counter Unit (TCU) IP present
> + in the JZ47xx SoCs from Ingenic.
> +
> config MFD_INTEL_QUARK_I2C_GPIO
> tristate "Intel Quark MFD I2C GPIO"
> depends on PCI
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 52b1a90ff515..fb89e131ae98 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -180,6 +180,7 @@ obj-$(CONFIG_AB8500_CORE) += ab8500-core.o
> ab8500-sysctrl.o
> obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
> obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
> obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o
> +obj-$(CONFIG_INGENIC_TCU) += ingenic-tcu.o
> obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
> obj-$(CONFIG_LPC_SCH) += lpc_sch.o
> obj-$(CONFIG_LPC_ICH) += lpc_ich.o
> diff --git a/drivers/mfd/ingenic-tcu.c b/drivers/mfd/ingenic-tcu.c
> new file mode 100644
> index 000000000000..6c1d5e4310c1
> --- /dev/null
> +++ b/drivers/mfd/ingenic-tcu.c
> @@ -0,0 +1,113 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * JZ47xx SoCs TCU MFD driver
Nit: Another line here please.
> + * Copyright (C) 2019 Paul Cercueil <p...@crapouillou.net>
> + */
> +
> +#include <linux/mfd/ingenic-tcu.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +struct ingenic_soc_info {
> + unsigned int num_channels;
> +};
> +
> +static struct regmap *tcu_regmap __initdata;
> +
> +static const struct regmap_config ingenic_tcu_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = TCU_REG_OST_CNTHBUF,
> +};
> +
> +static const struct ingenic_soc_info jz4740_soc_info = {
> + .num_channels = 8,
> +};
> +
> +static const struct ingenic_soc_info jz4725b_soc_info = {
> + .num_channels = 6,
> +};
> +
> +static const struct of_device_id ingenic_tcu_of_match[] = {
> + { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
> + { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
> + { .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
> + { }
> +};
> +
> +static struct regmap * __init ingenic_tcu_create_regmap(struct device_node
> *np)
> +{
> + struct resource res;
> + void __iomem *base;
> + struct regmap *map;
> +
> + if (!of_match_node(ingenic_tcu_of_match, np))
> + return ERR_PTR(-EINVAL);
> +
> + base = of_io_request_and_map(np, 0, "TCU");
> + if (IS_ERR(base))
> + return ERR_PTR(PTR_ERR(base));
> +
> + map = regmap_init_mmio(NULL, base, &ingenic_tcu_regmap_config);
> + if (IS_ERR(map))
> + goto err_iounmap;
> +
> + return map;
> +
> +err_iounmap:
> + iounmap(base);
> + of_address_to_resource(np, 0, &res);
> + release_mem_region(res.start, resource_size(&res));
> +
> + return map;
> +}
Why does this need to be set-up earlier than probe()?
> +static int __init ingenic_tcu_probe(struct platform_device *pdev)
> +{
> + struct regmap *map = ingenic_tcu_get_regmap(pdev->dev.of_node);
> +
> + platform_set_drvdata(pdev, map);
> +
> + regmap_attach_dev(&pdev->dev, map, &ingenic_tcu_regmap_config);
> +
> + return devm_of_platform_populate(&pdev->dev);
> +}
> +
> +static struct platform_driver ingenic_tcu_driver = {
> + .driver = {
> + .name = "ingenic-tcu",
> + .of_match_table = ingenic_tcu_of_match,
> + },
> +};
> +
> +static int __init ingenic_tcu_platform_init(void)
> +{
> + return platform_driver_probe(&ingenic_tcu_driver,
> + ingenic_tcu_probe);
What? Why?
> +}
> +subsys_initcall(ingenic_tcu_platform_init);
> +
> +struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np)
> +{
> + if (!tcu_regmap)
> + tcu_regmap = ingenic_tcu_create_regmap(np);
> +
> + return tcu_regmap;
> +}
This makes me pretty uncomfortable.
What calls it?
> +bool ingenic_tcu_pwm_can_use_chn(struct device *dev, unsigned int channel)
> +{
> + const struct ingenic_soc_info *soc = device_get_match_data(dev->parent);
> +
> + /* Enable all TCU channels for PWM use by default except channels 0/1 */
> + u32 pwm_channels_mask = GENMASK(soc->num_channels - 1, 2);
> +
> + device_property_read_u32(dev->parent, "ingenic,pwm-channels-mask",
> + &pwm_channels_mask);
> +
> + return !!(pwm_channels_mask & BIT(channel));
> +}
> +EXPORT_SYMBOL_GPL(ingenic_tcu_pwm_can_use_chn);
> diff --git a/include/linux/mfd/ingenic-tcu.h b/include/linux/mfd/ingenic-tcu.h
> index 2083fa20821d..21df23916cd2 100644
> --- a/include/linux/mfd/ingenic-tcu.h
> +++ b/include/linux/mfd/ingenic-tcu.h
> @@ -6,6 +6,11 @@
> #define __LINUX_MFD_INGENIC_TCU_H_
>
> #include <linux/bitops.h>
> +#include <linux/init.h>
> +
> +struct device;
> +struct device_node;
> +struct regmap;
>
> #define TCU_REG_WDT_TDR 0x00
> #define TCU_REG_WDT_TCER 0x04
> @@ -53,4 +58,7 @@
> #define TCU_REG_TCNTc(c) (TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
> #define TCU_REG_TCSRc(c) (TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
>
> +struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np);
> +bool ingenic_tcu_pwm_can_use_chn(struct device *dev, unsigned int channel);
> +
> #endif /* __LINUX_MFD_INGENIC_TCU_H_ */
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
