This driver supports the application buttons on some Fujitsu Lifebook laptops.
These buttons are read via the SMBus, for more details see:
http://apanel.sourceforge.net/tech.php
The buttons are handled as by the regular input system.
Two models are detected now, but other Fujitsu laptop's have
keys that may work similarly.
It is based on the earlier apanel driver done by Jochen Eisenger, but
with many changes. The original driver used ioctl's and a separate
user space program; this version hooks into the input subsystem so
that the normal Gnome/KDE shortcuts work without any userspace
changes.
This patch is against 2.6.23-rc5 and fixes the input_polled_dev and
mapping issues from earlier version.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
---
drivers/input/misc/Kconfig | 14 +
drivers/input/misc/Makefile | 1
drivers/input/misc/apanel.c | 403 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 418 insertions(+)
--- a/drivers/input/misc/Kconfig 2007-08-29 15:33:36.000000000 +0100
+++ b/drivers/input/misc/Kconfig 2007-09-03 07:56:33.000000000 +0100
@@ -40,6 +40,20 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support"
depends on M68K
+config INPUT_APANEL
+ tristate "Fujitsu Lifebook Application Panel buttons"
+ depends on X86
+ select I2C_I801
+ select INPUT_POLLDEV
+ select CHECK_SIGNATURE
+ help
+ Say Y here for support of the Application Panel buttons, used on
+ Fujitsu Lifebook. These are attached to the mainboard through
+ an SMBus interface managed by the I2C Intel ICH (i801) driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called apanel.
+
config INPUT_IXP4XX_BEEPER
tristate "IXP4XX Beeper support"
depends on ARCH_IXP4XX
--- a/drivers/input/misc/Makefile 2007-08-29 15:31:51.000000000 +0100
+++ b/drivers/input/misc/Makefile 2007-09-03 07:45:56.000000000 +0100
@@ -18,3 +18,4 @@ obj-$(CONFIG_INPUT_POWERMATE) += powerm
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+obj-$(CONFIG_INPUT_APANEL) += apanel.o
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ b/drivers/input/misc/apanel.c 2007-09-03 09:35:52.000000000 +0100
@@ -0,0 +1,403 @@
+/*
+ * Fujitsu Lifebook Application Panel button drive
+ *
+ * Copyright (C) 2007 Stephen Hemminger <[EMAIL PROTECTED]>
+ * Copyright (C) 2001-2003 Jochen Eisinger <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Many Fujitsu Lifebook have a small panel of buttons that are
+ * accessible via the i2c/smbus interface. This driver polls those
+ * buttons and generates input events.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/input-polldev.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+struct keymap {
+ u16 mask;
+ unsigned keycode;
+};
+
+static struct keymap app_media_keys[] = {
+ { 0x1, KEY_MAIL },
+ { 0x2, KEY_WWW },
+ { 0x4, KEY_PROG2 },
+ { 0x8, KEY_PROG1 },
+ { 0x100, KEY_FORWARD },
+ { 0x200, KEY_REWIND },
+ { 0x400, KEY_STOPCD },
+ { 0x800, KEY_PLAYPAUSE },
+ { 0 }
+};
+
+static struct keymap four_keys[] = {
+ { 0x1, KEY_PROG4 },
+ { 0x2, KEY_PROG3 },
+ { 0x4, KEY_PROG2 },
+ { 0x8, KEY_PROG1 },
+ { 0 }
+};
+
+static const struct keymap *keymap;
+
+static int __init dmi_matched(struct dmi_system_id *dmi)
+{
+ keymap = dmi->driver_data;
+ return 1;
+}
+
+/* List of systems known to work */
+static struct dmi_system_id apanel_dmi_table[] __initdata = {
+ {
+ .callback = dmi_matched,
+ .ident = "Lifebook S",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
+ },
+ .driver_data = app_media_keys,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "Lifebook B6210",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B6210"),
+ },
+ .driver_data = four_keys,
+ },
+ { }
+};
+
+/* Magic constants in BIOS that tell about buttons */
+enum apanel_devid {
+ APANEL_DEV_NONE = 0,
+ APANEL_DEV_APPBTN= 1,
+ APANEL_DEV_CDBTN = 2,
+ APANEL_DEV_LCD = 3,
+ APANEL_DEV_LED = 4,
+ APANEL_DEV_MAX,
+};
+
+enum apanel_chip {
+ CHIP_NONE = 0,
+ CHIP_OZ992C = 1,
+ CHIP_OZ163T = 2,
+ CHIP_OZ711M3= 4,
+};
+static enum apanel_chip device_chip[APANEL_DEV_MAX];
+
+/* names for APANEL_XXX */
+static const char *device_names[APANEL_DEV_MAX] = {
+ [APANEL_DEV_APPBTN] = "Application Buttons",
+ [APANEL_DEV_LCD] = "LCD",
+ [APANEL_DEV_LED] = "LED",
+ [APANEL_DEV_CDBTN] = "CD Buttons",
+};
+
+struct apanel {
+ struct input_polled_dev *ipdev;
+ struct i2c_client client;
+ struct work_struct led_work;
+};
+
+MODULE_AUTHOR("Stephen Hemminger <[EMAIL PROTECTED]>");
+MODULE_DESCRIPTION("Fujitsu Lifebook Application Panel driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Load even if computer is not in database");
+
+static int apanel_probe(struct i2c_adapter *, int, int);
+
+/* for now, we only support one address */
+static unsigned short normal_i2c[] = {0, I2C_CLIENT_END};
+static unsigned short ignore = I2C_CLIENT_END;
+static struct i2c_client_address_data addr_data = {
+ .normal_i2c = normal_i2c,
+ .probe = &ignore,
+ .ignore = &ignore,
+};
+
+/* Poll for key changes every 100ms
+ *
+ * Read Application keys via SMI
+ * A (0x4), B (0x8), Internet (0x2), Email (0x1).
+ */
+static void report_key(struct input_dev *input, unsigned keycode)
+{
+ input_report_key(input, keycode, 1);
+ input_sync(input);
+ input_report_key(input, keycode, 0);
+ input_sync(input);
+}
+
+static void apanel_poll(struct input_polled_dev *ipdev)
+{
+ struct apanel *ap = ipdev->private;
+ u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8;
+ const struct keymap *key;
+ s32 data;
+
+ data = i2c_smbus_read_word_data(&ap->client, cmd);
+ if (data < 0) {
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "apanel: smbus read error %d\n",
data);
+ return;
+ }
+
+ /* write back to clear latch */
+ i2c_smbus_write_word_data(&ap->client, cmd, 0);
+
+ if (!data)
+ return;
+
+ pr_debug("apanel: poll data=%#x\n", data);
+ for (key = keymap; key->mask; ++key)
+ if (data & key->mask)
+ report_key(ap->ipdev->input, key->keycode);
+}
+
+/* Track state changes of LED
+ * There are actually four LED's (A, B, Internet, E-Mail),
+ * unsure about how to access others and what LED_xxx value would be useful.
+ */
+static void apanel_led(struct work_struct *work)
+{
+ struct apanel *ap = container_of(work, struct apanel, led_work);
+
+ i2c_smbus_write_word_data(&ap->client, 0x10,
+ test_bit(LED_MAIL, ap->ipdev->input->led)
+ ? 0x8000 : 0);
+}
+
+/* Callback from input layer when state change happens.
+ * Used to handle LED control.
+ */
+static int apanel_event(struct input_dev *input, unsigned int type,
+ unsigned int code, int value)
+{
+ struct input_polled_dev *ipdev = input->private;
+ struct apanel *ap = ipdev->private;
+
+ if (device_chip[APANEL_DEV_LED] == CHIP_NONE || type != EV_LED)
+ return -1;
+
+ schedule_work(&ap->led_work);
+ return 0;
+}
+
+static int apanel_detach_client(struct i2c_client *client)
+{
+ struct apanel *ap = i2c_get_clientdata(client);
+
+ input_unregister_polled_device(ap->ipdev);
+ i2c_detach_client(&ap->client);
+ kfree(ap);
+ return 0;
+}
+
+/* Function is invoked for every i2c adapter. */
+static int apanel_attach_adapter(struct i2c_adapter *adap)
+{
+ pr_debug("apanel: attach adapter id=%d\n", adap->id);
+
+ /* Our device is connected only to i801 on laptop */
+ if (adap->id != I2C_HW_SMBUS_I801)
+ return -ENODEV;
+
+ return i2c_probe(adap, &addr_data, apanel_probe);
+}
+
+static struct i2c_driver apanel_driver = {
+ .driver = {
+ .name = "apanel",
+ },
+ .attach_adapter = &apanel_attach_adapter,
+ .detach_client = &apanel_detach_client,
+};
+
+/*
+ basically this function should probe the i2c client, but we know that it has
+ to be the one we're looking for.
+ */
+static int apanel_probe(struct i2c_adapter *bus, int address, int kind)
+{
+ struct apanel *ap;
+ const struct keymap *key;
+ struct input_polled_dev *ipdev;
+ u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8;
+ int err = -ENOMEM;
+
+ pr_debug("apanel: probe adapter %p addr %d kind %d\n",
+ bus, address, kind);
+
+ ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+ if (!ap)
+ goto out0;
+
+ ipdev = input_allocate_polled_device();
+ if (!ipdev)
+ goto out1;
+
+ ap->ipdev = ipdev;
+ ap->client.adapter = bus;
+ ap->client.addr = address;
+ ap->client.driver = &apanel_driver;
+ strlcpy(ap->client.name, "apanel", I2C_NAME_SIZE);
+ i2c_set_clientdata(&ap->client, ap);
+ INIT_WORK(&ap->led_work, apanel_led);
+
+ ipdev->poll = apanel_poll;
+ ipdev->poll_interval = 500;
+ ipdev->input->name = "Lifebook Panel buttons";
+ ipdev->input->phys = "apanel/input0";
+ ipdev->input->id.bustype = BUS_HOST;
+ ipdev->private = ap;
+
+ ipdev->input->evbit[LONG(EV_KEY)] = BIT(EV_KEY);
+ for (key = keymap; key->mask; ++key)
+ set_bit(key->keycode, ipdev->input->keybit);
+
+ if (device_chip[APANEL_DEV_LED] != CHIP_NONE) {
+ ipdev->input->event = apanel_event;
+ ipdev->input->evbit[0] |= BIT(EV_LED);
+ set_bit(LED_MAIL, ipdev->input->ledbit);
+ }
+
+ err = i2c_attach_client(&ap->client);
+ if (err)
+ goto out2;
+
+ ipdev->input->dev.parent = &ap->client.dev;
+ printk("ipdev=%p input=%p ap=%p\n", ipdev, ipdev->input, ap);
+
+ i2c_smbus_write_word_data(&ap->client, cmd, 0);
+
+ err = input_register_polled_device(ipdev);
+ if (err)
+ goto out3;
+
+ return 0;
+out3:
+ i2c_detach_client(&ap->client);
+out2:
+ input_free_polled_device(ipdev);
+out1:
+ kfree(ap);
+out0:
+ return err;
+}
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+ ssize_t offset;
+ const unsigned char signature[] = "FJKEYINF";
+
+ for (offset = 0; offset < 0x10000; offset += 0x10) {
+ if (check_signature(bios + offset, signature,
+ sizeof(signature)-1))
+ return bios + offset;
+ }
+
+ printk(KERN_ERR "apanel: Fujitsu BIOS signature '%s' not found...\n",
+ signature);
+ return NULL;
+}
+
+static int __init apanel_init(void)
+{
+ void __iomem *bios;
+ const void __iomem *p;
+ u8 devno;
+ int found = 0;
+
+ if (!dmi_check_system(apanel_dmi_table)) {
+ printk(KERN_WARNING "apanel: DMI information does not match\n");
+ if (!force)
+ return -ENODEV;
+
+ /* default key map */
+ keymap = four_keys;
+ }
+
+ bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+
+ p = bios_signature(bios);
+ if (!p) {
+ iounmap(bios);
+ return -ENODEV;
+ }
+
+ /* just use the first address */
+ p += 8;
+ normal_i2c[0] = readb(p+3) >> 1;
+
+ for ( ; (devno = readb(p)) & 0x7f; p += 4) {
+ unsigned char method, slave, chip;
+
+ method = readb(p + 1);
+ chip = readb(p + 2);
+ slave = readb(p + 3) >> 1;
+
+ if (slave != normal_i2c[0]) {
+ printk(KERN_ERR "apanel: only one SMBus slave "
+ "address supported, skiping device...\n");
+ continue;
+ }
+
+ /* translate alternative device numbers */
+ switch (devno) {
+ case 6:
+ devno = APANEL_DEV_APPBTN;
+ break;
+ case 7:
+ devno = APANEL_DEV_LED;
+ break;
+ }
+
+ if (devno >= APANEL_DEV_MAX)
+ printk(KERN_WARNING "apanel: unknown device %d found\n",
+ devno);
+ else if (device_chip[devno] != CHIP_NONE)
+ printk(KERN_ERR "apanel: duplicate entry for %s\n",
+ device_names[devno]);
+
+ else if (method != 1 && method != 2 && method != 4) {
+ printk(KERN_ERR "apanel: unknown method %u for %s\n",
+ method, device_names[devno]);
+ } else {
+ pr_debug("apanel: %s found, chip=%d\n",
+ device_names[devno], chip);
+
+ device_chip[devno] = (enum apanel_chip) chip;
+ ++found;
+ }
+ }
+ iounmap(bios);
+
+ if (found == 0) {
+ printk(KERN_ERR "apanel: no input devices reported by BIOS\n");
+ return -EIO;
+ }
+
+ return i2c_add_driver(&apanel_driver);
+}
+module_init(apanel_init);
+
+static void __exit apanel_cleanup(void)
+{
+ i2c_del_driver(&apanel_driver);
+}
+module_exit(apanel_cleanup);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
