On 02/07/2019 11:40, Frank Wunderlich wrote:
> From: Josef Friedl <[email protected]>
>
> poweroff for BPI-R2
> Suggested-by: Frank Wunderlich <[email protected]>
>
> Signed-off-by: Josef Friedl <[email protected]>
> =2D--
Please provide a proper commit message. Also subject should be adjusted. Just
have a look into the git log to see what prefix you should use.
What's =2D-- ?
> .../devicetree/bindings/mfd/mt6397.txt | 10 ++++++-
> .../bindings/power/reset/mt6323-poweroff.txt | 20 +++++++++++++
> .../devicetree/bindings/rtc/rtc-mt6397.txt | 29 +++++++++++++++++++
> MAINTAINERS | 6 ++++
> 4 files changed, 64 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-p=
> oweroff.txt
> create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentat=
> ion/devicetree/bindings/mfd/mt6397.txt
> index 0ebd08af777d..44acb9827716 100644
> =2D-- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following=
> sub modules:
> - Clock
> - LED
> - Keys
> +- Power controller
>
> It is interfaced to host controller using SPI interface by a proprietary =
> hardware
> called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwra=
> p.
It seems you have some problems with enconding or word wrapping by your email
setting. please check that.
> @@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
> Optional subnodes:
>
> - rtc
> - Required properties:
> + Required properties: Should be one of follows
> + - compatible: "mediatek,mt6323-rtc"
> - compatible: "mediatek,mt6397-rtc"
> + For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> - regulators
> Required properties:
> - compatible: "mediatek,mt6397-regulator"
> @@ -46,6 +49,11 @@ Optional subnodes:
> - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>
> +- power-controller
> + Required properties:
> + - compatible: "mediatek,mt6323-pwrc"
> + For details, see
> Documentation/devicetree/bindings/power/reset/mt6323-po=
> weroff.txt
> +
> Example:
> pwrap: pwrap@1000f000 {
> compatible =3D "mediatek,mt8135-pwrap";
> diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff=
> .txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> new file mode 100644
> index 000000000000..933f0c48e887
> =2D-- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> @@ -0,0 +1,20 @@
> +Device Tree Bindings for Power Controller on MediaTek PMIC
> +
> +The power controller which could be found on PMIC is responsible for exte=
> rnally
> +powering off or on the remote MediaTek SoC through the circuit BBPU.
> +
> +Required properties:
> +- compatible: Should be one of follows
> + "mediatek,mt6323-pwrc": for MT6323 PMIC
> +
> +Example:
> +
> + pmic {
> + compatible =3D "mediatek,mt6323";
> +
> + ...
> +
> + power-controller {
> + compatible =3D "mediatek,mt6323-pwrc";
> + };
> + }
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Docume=
> ntation/devicetree/bindings/rtc/rtc-mt6397.txt
> new file mode 100644
> index 000000000000..ebd1cf80dcc8
> =2D-- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> @@ -0,0 +1,29 @@
> +Device-Tree bindings for MediaTek PMIC based RTC
> +
> +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that =
> works
> +as a type of multi-function device (MFD). The RTC can be configured and s=
> et up
> +with PMIC wrapper bus which is a common resource shared with the other
> +functions found on the same PMIC.
> +
> +For MediaTek PMIC MFD bindings, see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +For MediaTek PMIC wrapper bus bindings, see:
> +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
In the end there is no difference between the mt6397 rtc and the mt7622-rtc,
right? Please rename the binding document of mt7622 and add the compatible
there. No need to add a new file.
> +
> +Required properties:
> +- compatible: Should be one of follows
> + "mediatek,mt6323-rtc": for MT6323 PMIC
> + "mediatek,mt6397-rtc": for MT6397 PMIC
> +
> +Example:
> +
> + pmic {
> + compatible =3D "mediatek,mt6323";
> +
> + ...
> +
> + rtc {
> + compatible =3D "mediatek,mt6323-rtc";
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 01a52fc964da..ec6ff342aa3c 100644
> =2D-- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9920,6 +9920,12 @@ S: Maintained
> F: drivers/net/dsa/mt7530.*
> F: net/dsa/tag_mtk.c
>
> +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
> +M: Sean Wang <[email protected]>
> +L: [email protected]
> +S: Maintained
> +F: Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +
> MEDIATEK JPEG DRIVER
> M: Rick Chang <[email protected]>
> M: Bin Liu <[email protected]>
> =2D-
> 2.17.1
Maintainers entries are normally a seperate patch.
Regards,
Matthias
>
