HI13X1_GMAC delete request for soft reset at first,
otherwise, the subsequent initialization will not
take effect.

Signed-off-by: Jiangfeng Xiao <xiaojiangf...@huawei.com>
---
 drivers/net/ethernet/hisilicon/hip04_eth.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c 
b/drivers/net/ethernet/hisilicon/hip04_eth.c
index fe61b01..19d8cfd 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -16,6 +16,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#define SC_PPE_RESET_DREQ              0x026C
+
 #define PPE_CFG_RX_ADDR                        0x100
 #define PPE_CFG_POOL_GRP               0x300
 #define PPE_CFG_RX_BUF_SIZE            0x400
@@ -61,6 +63,8 @@
 
 #define PPE_HIS_RX_PKT_CNT             0x804
 
+#define RESET_DREQ_ALL                 0xffffffff
+
 /* REG_INTERRUPT */
 #define RCV_INT                                BIT(10)
 #define RCV_NOBUF                      BIT(8)
@@ -168,6 +172,9 @@ struct rx_desc {
 
 struct hip04_priv {
        void __iomem *base;
+#if defined(CONFIG_HI13X1_GMAC)
+       void __iomem *sysctrl_base;
+#endif
        int phy_mode;
        int chan;
        unsigned int port;
@@ -244,6 +251,13 @@ static void hip04_config_port(struct net_device *ndev, u32 
speed, u32 duplex)
        writel_relaxed(val, priv->base + GE_MODE_CHANGE_REG);
 }
 
+static void hip04_reset_dreq(struct hip04_priv *priv)
+{
+#if defined(CONFIG_HI13X1_GMAC)
+       writel_relaxed(RESET_DREQ_ALL, priv->sysctrl_base + SC_PPE_RESET_DREQ);
+#endif
+}
+
 static void hip04_reset_ppe(struct hip04_priv *priv)
 {
        u32 val, tmp, timeout = 0;
@@ -853,6 +867,15 @@ static int hip04_mac_probe(struct platform_device *pdev)
                goto init_fail;
        }
 
+#if defined(CONFIG_HI13X1_GMAC)
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+       priv->sysctrl_base = devm_ioremap_resource(d, res);
+       if (IS_ERR(priv->sysctrl_base)) {
+               ret = PTR_ERR(priv->sysctrl_base);
+               goto init_fail;
+       }
+#endif
+
        ret = of_parse_phandle_with_fixed_args(node, "port-handle", 2, 0, &arg);
        if (ret < 0) {
                dev_warn(d, "no port-handle\n");
@@ -921,6 +944,7 @@ static int hip04_mac_probe(struct platform_device *pdev)
        ndev->irq = irq;
        netif_napi_add(ndev, &priv->napi, hip04_rx_poll, NAPI_POLL_WEIGHT);
 
+       hip04_reset_dreq(priv);
        hip04_reset_ppe(priv);
        if (priv->phy_mode == PHY_INTERFACE_MODE_MII)
                hip04_config_port(ndev, SPEED_100, DUPLEX_FULL);
-- 
1.8.5.6

Reply via email to