On 08-07-19, 16:11, k.koniec...@partner.samsung.com wrote:
> From: Kamil Konieczny <k.koniec...@partner.samsung.com>
>
> Add enable regulators to dev_pm_opp_set_regulators() and disable
> regulators to dev_pm_opp_put_regulators(). This prepares for
> converting exynos-bus devfreq driver to use dev_pm_opp_set_rate().
>
> Signed-off-by: Kamil Konieczny <k.koniec...@partner.samsung.com>
> ---
> drivers/opp/core.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> index 0e7703fe733f..947cac452854 100644
> --- a/drivers/opp/core.c
> +++ b/drivers/opp/core.c
> @@ -1580,8 +1580,19 @@ struct opp_table *dev_pm_opp_set_regulators(struct
> device *dev,
> if (ret)
> goto free_regulators;
>
> + for (i = 0; i < opp_table->regulator_count; i++) {
> + ret = regulator_enable(opp_table->regulators[i]);
> + if (ret < 0)
> + goto disable;
> + }
I am wondering on why is this really required as this isn't done for
any other platform, probably because the regulators are enabled by
bootloader and are always on.
--
viresh
