Regulators should be enabled before clocks to avoid h/w hang. This
require change in exynos_bus_probe() to move exynos_bus_parse_of()
after exynos_bus_parent_parse_of() and change in enabling sequence
of regulator and clock in exynos_bus_parse_of(). Similar change is
needed in exynos_bus_exit() where clock should be disabled first.
Signed-off-by: Kamil Konieczny <k.koniec...@partner.samsung.com>
---
This patch is new to this series.
---
drivers/devfreq/exynos-bus.c | 58 ++++++++++++++++++++----------------
1 file changed, 32 insertions(+), 26 deletions(-)
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 486cc5b422f1..f391044aa39d 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -194,11 +194,11 @@ static void exynos_bus_exit(struct device *dev)
if (ret < 0)
dev_warn(dev, "failed to disable the devfreq-event devices\n");
+ clk_disable_unprepare(bus->clk);
if (bus->regulator)
regulator_disable(bus->regulator);
dev_pm_opp_of_remove_table(dev);
- clk_disable_unprepare(bus->clk);
}
/*
@@ -326,8 +326,7 @@ static int exynos_bus_parent_parse_of(struct device_node
*np,
return ret;
}
-static int exynos_bus_parse_of(struct device_node *np,
- struct exynos_bus *bus)
+static int exynos_bus_parse_of(struct exynos_bus *bus)
{
struct device *dev = bus->dev;
struct dev_pm_opp *opp;
@@ -341,36 +340,35 @@ static int exynos_bus_parse_of(struct device_node *np,
return PTR_ERR(bus->clk);
}
- ret = clk_prepare_enable(bus->clk);
+ /* Get the freq and voltage from OPP table to scale the bus freq */
+ ret = dev_pm_opp_of_add_table(dev);
if (ret < 0) {
- dev_err(dev, "failed to get enable clock\n");
+ dev_err(dev, "failed to get OPP table\n");
return ret;
}
- /* Get the freq and voltage from OPP table to scale the bus freq */
- ret = dev_pm_opp_of_add_table(dev);
+ ret = clk_prepare_enable(bus->clk);
if (ret < 0) {
- dev_err(dev, "failed to get OPP table\n");
+ dev_err(dev, "failed to enable clock\n");
goto err_clk;
}
-
rate = clk_get_rate(bus->clk);
opp = devfreq_recommended_opp(dev, &rate, 0);
if (IS_ERR(opp)) {
dev_err(dev, "failed to find dev_pm_opp\n");
ret = PTR_ERR(opp);
- goto err_opp;
+ goto err;
}
bus->curr_freq = dev_pm_opp_get_freq(opp);
dev_pm_opp_put(opp);
return 0;
-err_opp:
- dev_pm_opp_of_remove_table(dev);
-err_clk:
+err:
clk_disable_unprepare(bus->clk);
+err_clk:
+ dev_pm_opp_of_remove_table(dev);
return ret;
}
@@ -386,6 +384,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
struct exynos_bus *bus;
int ret, max_state;
unsigned long min_freq, max_freq;
+ bool passive = false;
if (!np) {
dev_err(dev, "failed to find devicetree node\n");
@@ -399,27 +398,31 @@ static int exynos_bus_probe(struct platform_device *pdev)
bus->dev = &pdev->dev;
platform_set_drvdata(pdev, bus);
- /* Parse the device-tree to get the resource information */
- ret = exynos_bus_parse_of(np, bus);
- if (ret < 0)
- return ret;
-
profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
- if (!profile) {
- ret = -ENOMEM;
- goto err;
- }
+ if (!profile)
+ return -ENOMEM;
node = of_parse_phandle(dev->of_node, "devfreq", 0);
if (node) {
of_node_put(node);
- goto passive;
+ passive = true;
} else {
ret = exynos_bus_parent_parse_of(np, bus);
+ if (ret < 0)
+ return ret;
}
- if (ret < 0)
- goto err;
+ /* Parse the device-tree to get the resource information */
+ ret = exynos_bus_parse_of(bus);
+ if (ret < 0) {
+ if (!passive)
+ regulator_disable(bus->regulator);
+
+ return ret;
+ }
+
+ if (passive)
+ goto passive;
/* Initialize the struct profile and governor data for parent device */
profile->polling_ms = 50;
@@ -508,8 +511,11 @@ static int exynos_bus_probe(struct platform_device *pdev)
return 0;
err:
- dev_pm_opp_of_remove_table(dev);
clk_disable_unprepare(bus->clk);
+ if (!passive)
+ regulator_disable(bus->regulator);
+
+ dev_pm_opp_of_remove_table(dev);
return ret;
}
--
2.22.0
