Hi Christophe, Thank you for the patch.
On 7/21/19 11:05 PM, Christophe JAILLET wrote: > There is a typo in KTD2962_MM_MIN_CURR_THRESHOLD_SCALE. 6 and 9 are > switched in 2962. > > Define and use KTD2692_MM_MIN_CURR_THRESHOLD_SCALE instead. > > Signed-off-by: Christophe JAILLET <christophe.jail...@wanadoo.fr> > --- > drivers/leds/leds-ktd2692.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c > index 45296aaca9da..44db748c570e 100644 > --- a/drivers/leds/leds-ktd2692.c > +++ b/drivers/leds/leds-ktd2692.c > @@ -22,7 +22,7 @@ > /* Value related the movie mode */ > #define KTD2692_MOVIE_MODE_CURRENT_LEVELS 16 > #define KTD2692_MM_TO_FL_RATIO(x) ((x) / 3) > -#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE 8 > +#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE 8 > > /* Value related the flash mode */ > #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8 > @@ -253,7 +253,7 @@ static void ktd2692_setup(struct ktd2692_context *led) > ktd2692_expresswire_reset(led); > gpiod_direction_output(led->aux_gpio, KTD2692_LOW); > > - ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1) > + ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1) > | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE); > ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45) > | KTD2692_REG_FLASH_CURRENT_BASE); > Applied. -- Best regards, Jacek Anaszewski
