Hi Neil, On Wed, 24 Jul 2019 at 12:19, Neil Armstrong <narmstr...@baylibre.com> wrote: > > Hi Anand, > > On 24/07/2019 07:30, Anand Moon wrote: > > Hi All, > > > > On Mon, 22 Jul 2019 at 12:51, Neil Armstrong <narmstr...@baylibre.com> > > wrote: > >> > >> On 19/07/2019 21:29, Xavier Ruppen wrote: > >>> When powering off the Odroid N2, the tflash_vdd regulator is > >>> automatically turned off by the kernel. This is a problem > >>> when issuing the "reboot" command while using an SD card. > >>> The boot ROM does not power this regulator back on, blocking > >>> the reboot process at the boot ROM stage, preventing the > >>> SD card from being detected. > >>> > >>> Adding the "regulator-always-on" property fixes the problem. > >>> > >>> Signed-off-by: Xavier Ruppen <xrup...@gmail.com> > >>> --- > >>> > >>> Here is what the boot ROM output looks like without this patch: > >>> > >>> [root@alarm ~]# reboot > >>> [...] > >>> [ 24.275860] shutdown[1]: All loop devices detached. > >>> [ 24.278864] shutdown[1]: Detaching DM devices. > >>> [ 24.287105] kvm: exiting hardware virtualization > >>> [ 24.318776] reboot: Restarting system > >>> bl31 reboot reason: 0xd > >>> bl31 reboot reason: 0x0 > >>> system cmd 1. > >>> G12B:BL:6e7c85:7898ac;FEAT:E0F83180:2000;POC:F;RCY:0; > >>> EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;EMMC:800; > >>> NAND:81;SD?:0;SD:400;USB:8;LOOP:2;EMMC:800;NAND:81; > >>> SD?:0;SD:400;USB:8;LOOP:3; [...] > >>> > >>> Other people can be seen having this problem on the odroid > >>> forum [1]. > >>> > >>> The cause of the problem was found by Martin Blumenstingl > >>> on #linux-amlogic. We may want to add his Suggested-by tag > >>> if he agrees. > >>> > >>> [1] https://forum.odroid.com/viewtopic.php?f=176&t=33993 > >>> > >>> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 1 + > >>> 1 file changed, 1 insertion(+) > >>> > >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts > >>> b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts > >>> index 81780ffcc7f0..4e916e1f71f7 100644 > >>> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts > >>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts > >>> @@ -53,6 +53,7 @@ > >>> > >>> gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; > >>> enable-active-high; > >>> + regulator-always-on; > >>> }; > >>> > >>> tf_io: gpio-regulator-tf_io { > >>> > >> > >> Surely solves the situation, thanks ! > >> > >> please add a comment on top of "regulator-always-on" to explain why we > >> always enable it, > >> note we should always enable it in case of watchdog reboot or other > >> uncontrolled reset, > >> this regulator must never be disabled. > >> > >> Reviewed-by: Neil Armstrong <narmstr...@baylibre.com> > >> > >> Thanks, > >> Neil > >> > > > > I am afraid this did not fix the issue I was also facing with > > Archlinux on Odroid N2 using mainline u-boot. > > Seems to be a separate issue, could we start a separate thread with all your > setup (branch, git SHAa, configs, board setup, ...) for this ? > > Thanks, > Neil >
Ok sorry for the noise. Best Regards -Anand