Define two new required properties to define interrupts and
interrupt-names for tsens.
Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 673cc1831ee9..3d3dd5dc6d36 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -22,6 +22,8 @@ Required properties:
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
- #qcom,sensors: Number of sensors in tsens block
+- interrupts: Interrupts generated from Always-On subsystem (AOSS)
+- interrupt-names: The name of the interrupt e.g. "tsens0", "tsens1"
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to
specify
nvmem cells
@@ -40,6 +42,9 @@ tsens0: thermal-sensor@c263000 {
reg = <0xc263000 0x1ff>, /* TM */
<0xc222000 0x1ff>; /* SROT */
#qcom,sensors = <13>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tsens0";
+
#thermal-sensor-cells = <1>;
};
--
2.17.1
