If the panel is wrapped in a panel_bridge it gets prepar()ed before the upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks are not enabled yet). To avoid this move the panel's first DSI access to enable() so the upstream bridge can prepare the DSI host controller in it's pre_enable().
The second patch makes the disable() call symmetric to the above and the third one just eases debugging. Guido Günther (3): drm/panel: jh057n00900: Move panel DSI init to enable() drm/panel: jh057n00900: Move mipi_dsi_dcs_set_display_off to disable() drm/panel: jh057n00900: Print error code on all DRM_DEV_ERROR()s .../drm/panel/panel-rocktech-jh057n00900.c | 31 ++++++++++++------- 1 file changed, 19 insertions(+), 12 deletions(-) -- 2.20.1