This driver seems obsolte because this driver needs platform data
but no one in upstream passes it.

Link: https://lkml.org/lkml/2019/7/21/19
Cc: Ben Dooks <ben.do...@codethink.co.uk>
Suggested-by: Arnd Bergmann <a...@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

 arch/arm/configs/s3c2410_defconfig |   1 -
 drivers/spi/Kconfig                |   9 -
 drivers/spi/Makefile               |   1 -
 drivers/spi/spi-tle62x0.c          | 317 -----------------------------
 include/linux/spi/tle62x0.h        |  12 --
 5 files changed, 340 deletions(-)
 delete mode 100644 drivers/spi/spi-tle62x0.c
 delete mode 100644 include/linux/spi/tle62x0.h

diff --git a/arch/arm/configs/s3c2410_defconfig 
b/arch/arm/configs/s3c2410_defconfig
index 95b5a4ffddea..45ee51f690be 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -270,7 +270,6 @@ CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM78=m
 CONFIG_SENSORS_LM85=m
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3a1d8f1170de..38e0651946c1 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -900,15 +900,6 @@ config SPI_LOOPBACK_TEST
          primarily used for development of spi_master drivers
          and to detect regressions
 
-config SPI_TLE62X0
-       tristate "Infineon TLE62X0 (for power switching)"
-       depends on SYSFS
-       help
-         SPI driver for Infineon TLE62X0 series line driver chips,
-         such as the TLE6220, TLE6230 and TLE6240.  This provides a
-         sysfs interface, with each line presented as a kind of GPIO
-         exposing both switch control and diagnostic feedback.
-
 #
 # Add new SPI protocol masters in alphabetical order above this line
 #
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 63dcab552bcb..9566d896a4c8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -110,7 +110,6 @@ obj-$(CONFIG_SPI_SYNQUACER)         += spi-synquacer.o
 obj-$(CONFIG_SPI_TEGRA114)             += spi-tegra114.o
 obj-$(CONFIG_SPI_TEGRA20_SFLASH)       += spi-tegra20-sflash.o
 obj-$(CONFIG_SPI_TEGRA20_SLINK)                += spi-tegra20-slink.o
-obj-$(CONFIG_SPI_TLE62X0)              += spi-tle62x0.o
 spi-thunderx-objs                      := spi-cavium.o spi-cavium-thunderx.o
 obj-$(CONFIG_SPI_THUNDERX)             += spi-thunderx.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)         += spi-topcliff-pch.o
diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c
deleted file mode 100644
index 60dc69a39ace..000000000000
--- a/drivers/spi/spi-tle62x0.c
+++ /dev/null
@@ -1,317 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support Infineon TLE62x0 driver chips
- *
- * Copyright (c) 2007 Simtec Electronics
- *     Ben Dooks, <b...@simtec.co.uk>
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tle62x0.h>
-
-
-#define CMD_READ       0x00
-#define CMD_SET                0xff
-
-#define DIAG_NORMAL    0x03
-#define DIAG_OVERLOAD  0x02
-#define DIAG_OPEN      0x01
-#define DIAG_SHORTGND  0x00
-
-struct tle62x0_state {
-       struct spi_device       *us;
-       struct mutex            lock;
-       unsigned int            nr_gpio;
-       unsigned int            gpio_state;
-
-       unsigned char           tx_buff[4];
-       unsigned char           rx_buff[4];
-};
-
-static int to_gpio_num(struct device_attribute *attr);
-
-static inline int tle62x0_write(struct tle62x0_state *st)
-{
-       unsigned char *buff = st->tx_buff;
-       unsigned int gpio_state = st->gpio_state;
-
-       buff[0] = CMD_SET;
-
-       if (st->nr_gpio == 16) {
-               buff[1] = gpio_state >> 8;
-               buff[2] = gpio_state;
-       } else {
-               buff[1] = gpio_state;
-       }
-
-       dev_dbg(&st->us->dev, "buff %3ph\n", buff);
-
-       return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2);
-}
-
-static inline int tle62x0_read(struct tle62x0_state *st)
-{
-       unsigned char *txbuff = st->tx_buff;
-       struct spi_transfer xfer = {
-               .tx_buf         = txbuff,
-               .rx_buf         = st->rx_buff,
-               .len            = (st->nr_gpio * 2) / 8,
-       };
-       struct spi_message msg;
-
-       txbuff[0] = CMD_READ;
-       txbuff[1] = 0x00;
-       txbuff[2] = 0x00;
-       txbuff[3] = 0x00;
-
-       spi_message_init(&msg);
-       spi_message_add_tail(&xfer, &msg);
-
-       return spi_sync(st->us, &msg);
-}
-
-static unsigned char *decode_fault(unsigned int fault_code)
-{
-       fault_code &= 3;
-
-       switch (fault_code) {
-       case DIAG_NORMAL:
-               return "N";
-       case DIAG_OVERLOAD:
-               return "V";
-       case DIAG_OPEN:
-               return "O";
-       case DIAG_SHORTGND:
-               return "G";
-       }
-
-       return "?";
-}
-
-static ssize_t tle62x0_status_show(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct tle62x0_state *st = dev_get_drvdata(dev);
-       char *bp = buf;
-       unsigned char *buff = st->rx_buff;
-       unsigned long fault = 0;
-       int ptr;
-       int ret;
-
-       mutex_lock(&st->lock);
-       ret = tle62x0_read(st);
-       dev_dbg(dev, "tle62x0_read() returned %d\n", ret);
-       if (ret < 0) {
-               mutex_unlock(&st->lock);
-               return ret;
-       }
-
-       for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {
-               fault <<= 8;
-               fault  |= ((unsigned long)buff[ptr]);
-
-               dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]);
-       }
-
-       for (ptr = 0; ptr < st->nr_gpio; ptr++) {
-               bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2)));
-       }
-
-       *bp++ = '\n';
-
-       mutex_unlock(&st->lock);
-       return bp - buf;
-}
-
-static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL);
-
-static ssize_t tle62x0_gpio_show(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct tle62x0_state *st = dev_get_drvdata(dev);
-       int gpio_num = to_gpio_num(attr);
-       int value;
-
-       mutex_lock(&st->lock);
-       value = (st->gpio_state >> gpio_num) & 1;
-       mutex_unlock(&st->lock);
-
-       return snprintf(buf, PAGE_SIZE, "%d", value);
-}
-
-static ssize_t tle62x0_gpio_store(struct device *dev,
-               struct device_attribute *attr,
-               const char *buf, size_t len)
-{
-       struct tle62x0_state *st = dev_get_drvdata(dev);
-       int gpio_num = to_gpio_num(attr);
-       unsigned long val;
-       char *endp;
-
-       val = simple_strtoul(buf, &endp, 0);
-       if (buf == endp)
-               return -EINVAL;
-
-       dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val);
-
-       mutex_lock(&st->lock);
-
-       if (val)
-               st->gpio_state |= 1 << gpio_num;
-       else
-               st->gpio_state &= ~(1 << gpio_num);
-
-       tle62x0_write(st);
-       mutex_unlock(&st->lock);
-
-       return len;
-}
-
-static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO,
-               tle62x0_gpio_show, tle62x0_gpio_store);
-
-static struct device_attribute *gpio_attrs[] = {
-       [0]             = &dev_attr_gpio1,
-       [1]             = &dev_attr_gpio2,
-       [2]             = &dev_attr_gpio3,
-       [3]             = &dev_attr_gpio4,
-       [4]             = &dev_attr_gpio5,
-       [5]             = &dev_attr_gpio6,
-       [6]             = &dev_attr_gpio7,
-       [7]             = &dev_attr_gpio8,
-       [8]             = &dev_attr_gpio9,
-       [9]             = &dev_attr_gpio10,
-       [10]            = &dev_attr_gpio11,
-       [11]            = &dev_attr_gpio12,
-       [12]            = &dev_attr_gpio13,
-       [13]            = &dev_attr_gpio14,
-       [14]            = &dev_attr_gpio15,
-       [15]            = &dev_attr_gpio16
-};
-
-static int to_gpio_num(struct device_attribute *attr)
-{
-       int ptr;
-
-       for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) {
-               if (gpio_attrs[ptr] == attr)
-                       return ptr;
-       }
-
-       return -1;
-}
-
-static int tle62x0_probe(struct spi_device *spi)
-{
-       struct tle62x0_state *st;
-       struct tle62x0_pdata *pdata;
-       int ptr;
-       int ret;
-
-       pdata = dev_get_platdata(&spi->dev);
-       if (pdata == NULL) {
-               dev_err(&spi->dev, "no device data specified\n");
-               return -EINVAL;
-       }
-
-       st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);
-       if (st == NULL)
-               return -ENOMEM;
-
-       st->us = spi;
-       st->nr_gpio = pdata->gpio_count;
-       st->gpio_state = pdata->init_state;
-
-       mutex_init(&st->lock);
-
-       ret = device_create_file(&spi->dev, &dev_attr_status_show);
-       if (ret) {
-               dev_err(&spi->dev, "cannot create status attribute\n");
-               goto err_status;
-       }
-
-       for (ptr = 0; ptr < pdata->gpio_count; ptr++) {
-               ret = device_create_file(&spi->dev, gpio_attrs[ptr]);
-               if (ret) {
-                       dev_err(&spi->dev, "cannot create gpio attribute\n");
-                       goto err_gpios;
-               }
-       }
-
-       /* tle62x0_write(st); */
-       spi_set_drvdata(spi, st);
-       return 0;
-
- err_gpios:
-       while (--ptr >= 0)
-               device_remove_file(&spi->dev, gpio_attrs[ptr]);
-
-       device_remove_file(&spi->dev, &dev_attr_status_show);
-
- err_status:
-       kfree(st);
-       return ret;
-}
-
-static int tle62x0_remove(struct spi_device *spi)
-{
-       struct tle62x0_state *st = spi_get_drvdata(spi);
-       int ptr;
-
-       for (ptr = 0; ptr < st->nr_gpio; ptr++)
-               device_remove_file(&spi->dev, gpio_attrs[ptr]);
-
-       device_remove_file(&spi->dev, &dev_attr_status_show);
-       kfree(st);
-       return 0;
-}
-
-static struct spi_driver tle62x0_driver = {
-       .driver = {
-               .name   = "tle62x0",
-       },
-       .probe          = tle62x0_probe,
-       .remove         = tle62x0_remove,
-};
-
-module_spi_driver(tle62x0_driver);
-
-MODULE_AUTHOR("Ben Dooks <b...@simtec.co.uk>");
-MODULE_DESCRIPTION("TLE62x0 SPI driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:tle62x0");
diff --git a/include/linux/spi/tle62x0.h b/include/linux/spi/tle62x0.h
deleted file mode 100644
index 5d74b9fffca2..000000000000
--- a/include/linux/spi/tle62x0.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * tle62x0.h - platform glue to Infineon TLE62x0 driver chips
- *
- * Copyright 2007 Simtec Electronics
- *     Ben Dooks <b...@simtec.co.uk>
-*/
-
-struct tle62x0_pdata {
-       unsigned int            init_state;
-       unsigned int            gpio_count;
-};
-- 
2.17.1

Reply via email to