From: Mathias Nyman <[email protected]>
commit d39b5bad8658d6d94cb2d98a44a7e159db4f5030 upstream.
A second regression was found in the immediate data transfer (IDT)
support which was added to 5.2 kernel
IDT is used to transfer small amounts of data (up to 8 bytes) in the
field normally used for data dma address, thus avoiding dma mapping.
If the data was not already dma mapped, then IDT support assumed data was
in urb->transfer_buffer, and did not take into accound that even
small amounts of data (8 bytes) can be in a scatterlist instead.
This caused a NULL pointer dereference when sg_dma_len() was used
with non-dma mapped data.
Solve this by not using IDT if scatter gather buffer list is used.
Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support")
Cc: <[email protected]> # v5.2
Reported-by: Maik Stohn <[email protected]>
Tested-by: Maik Stohn <[email protected]>
CC: Nicolas Saenz Julienne <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link:
https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2170,7 +2170,8 @@ static inline bool xhci_urb_suitable_for
if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
- !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
+ !urb->num_sgs)
return true;
return false;
