On Sat, 2019-07-27 at 11:18 +0200, Boris Brezillon wrote:
> On Sat, 27 Jul 2019 09:23:33 +0800
> Qii Wang <qii.w...@mediatek.com> wrote:
>
> > On Wed, 2019-07-24 at 14:21 -0600, Rob Herring wrote:
> > > On Tue, Jul 09, 2019 at 09:09:21PM +0800, Qii Wang wrote:
> > > > Document MediaTek I3C master DT bindings.
> > > >
> > > > Signed-off-by: Qii Wang <qii.w...@mediatek.com>
> > > > ---
> > > > .../devicetree/bindings/i3c/mtk,i3c-master.txt | 48
> > > > ++++++++++++++++++++
> > > > 1 file changed, 48 insertions(+)
> > > > create mode 100644
> > > > Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > > b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > > new file mode 100644
> > > > index 0000000..d32eda6
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > > @@ -0,0 +1,48 @@
> > > > +Bindings for MediaTek I3C master block
> > > > +=====================================
> > > > +
> > > > +Required properties:
> > > > +--------------------
> > > > +- compatible: shall be "mediatek,i3c-master"
> > >
> > > Needs to be SoC specific.
> > >
> >
> > We hope that the SOCs will use the same driver and try to avoid big
> > changes. If there are inevitable changes in the future, then we will
> > modify the compatible to be SoC specific. cdns,i3c-master.txt is not SoC
> > specific either.
>
> The cadence case is a bit different I think. When the driver was
> developed there was no SoC integrating this IP. I guess Mediatek knows
> already which SoC(s) will embed the I3C master block.
>
ok, I will modify it as "mediatek,mt8183-i3c".
> >
> > > > +- reg: physical base address of the controller and apdma base, length
> > > > of
> > > > + memory mapped region.
> > > > +- reg-names: shall be "main" for master controller and "dma" for apdma.
> > > > +- interrupts: the interrupt line connected to this I3C master.
> > > > +- clocks: shall reference the i3c and apdma clocks.
> > > > +- clock-names: shall include "main" and "dma".
> > > > +
> > > > +Mandatory properties defined by the generic binding (see
> > > > +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> > > > +
> > > > +- #address-cells: shall be set to 3
> > > > +- #size-cells: shall be set to 0
> > > > +
> > > > +Optional properties defined by the generic binding (see
> > > > +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> > > > +
> > > > +- i2c-scl-hz
> > > > +- i3c-scl-hz
> > > > +
> > > > +I3C device connected on the bus follow the generic description (see
> > > > +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
> > > > +
> > > > +Example:
> > > > +
> > > > + i3c0: i3c@1100d000 {
> > > > + compatible = "mediatek,i3c-master";
> > > > + reg = <0x1100d000 0x1000>,
> > > > + <0x11000300 0x80>;
> > > > + reg-names = "main", "dma";
> > > > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
> > > > + clocks = <&infracfg CLK_INFRA_I3C0>,
> > > > + <&infracfg CLK_INFRA_AP_DMA>;
> > > > + clock-names = "main", "dma";
> > > > + #address-cells = <3>;
> > > > + #size-cells = <0>;
> > > > + i2c-scl-hz = <100000>;
> > > > +
> > > > + nunchuk: nunchuk@52 {
> > > > + compatible = "nintendo,nunchuk";
> > > > + reg = <0x52 0x0 0x10>;
> > > > + };
> > > > + };
> > > > --
> > > > 1.7.9.5
> > > >
> >
> >
>
