Use devm_() APIs to simplify the code.

Signed-off-by: Chuhong Yuan <[email protected]>
---
Changes in v3:
  - Split v2 into two patches.

 drivers/iio/light/tsl2772.c | 36 +++++++++++++++---------------------
 1 file changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index 83cece921843..f1134f183be7 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -860,6 +860,13 @@ static int tsl2772_chip_off(struct iio_dev *indio_dev)
        return tsl2772_write_control_reg(chip, 0x00);
 }
 
+static void tsl2772_chip_off_action(void *data)
+{
+       struct iio_dev *indio_dev = data;
+
+       tsl2772_chip_off(indio_dev);
+}
+
 /**
  * tsl2772_invoke_change - power cycle the device to implement the user
  *                         parameters
@@ -1807,10 +1814,10 @@ static int tsl2772_probe(struct i2c_client *clientp,
                return PTR_ERR(chip->vdd_supply);
        }
 
-       ret = devm_add_action(&clientp->dev, tsl2772_disable_regulators_action,
+       ret = devm_add_action_or_reset(&clientp->dev,
+                               tsl2772_disable_regulators_action,
                              chip);
        if (ret < 0) {
-               tsl2772_disable_regulators_action(chip);
                dev_err(&clientp->dev, "Failed to setup regulator cleanup 
action %d\n",
                        ret);
                return ret;
@@ -1877,15 +1884,14 @@ static int tsl2772_probe(struct i2c_client *clientp,
        if (ret < 0)
                return ret;
 
-       ret = iio_device_register(indio_dev);
-       if (ret) {
-               tsl2772_chip_off(indio_dev);
-               dev_err(&clientp->dev,
-                       "%s: iio registration failed\n", __func__);
+       ret = devm_add_action_or_reset(&clientp->dev,
+                                       tsl2772_chip_off_action,
+                                       indio_dev);
+
+       if (ret < 0)
                return ret;
-       }
 
-       return 0;
+       return devm_iio_device_register(&clientp->dev, indio_dev);
 }
 
 static int tsl2772_suspend(struct device *dev)
@@ -1922,17 +1928,6 @@ static int tsl2772_resume(struct device *dev)
        return tsl2772_chip_on(indio_dev);
 }
 
-static int tsl2772_remove(struct i2c_client *client)
-{
-       struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-       tsl2772_chip_off(indio_dev);
-
-       iio_device_unregister(indio_dev);
-
-       return 0;
-}
-
 static const struct i2c_device_id tsl2772_idtable[] = {
        { "tsl2571", tsl2571 },
        { "tsl2671", tsl2671 },
@@ -1979,7 +1974,6 @@ static struct i2c_driver tsl2772_driver = {
        },
        .id_table = tsl2772_idtable,
        .probe = tsl2772_probe,
-       .remove = tsl2772_remove,
 };
 
 module_i2c_driver(tsl2772_driver);
-- 
2.20.1

Reply via email to