On 7/30/19 10:53 PM, Heiner Kallweit wrote:
> On 31.07.2019 02:12, Tao Ren wrote:
>> On 7/29/19 11:00 PM, Heiner Kallweit wrote:
>>> On 30.07.2019 07:05, Tao Ren wrote:
>>>> On 7/29/19 8:35 PM, Andrew Lunn wrote:
>>>>> On Mon, Jul 29, 2019 at 05:25:32PM -0700, Tao Ren wrote:
>>>>>> BCM54616S feature "PHY_GBIT_FEATURES" was removed by commit dcdecdcfe1fc
>>>>>> ("net: phy: switch drivers to use dynamic feature detection"). As dynamic
>>>>>> feature detection doesn't work when BCM54616S is working in RGMII-Fiber
>>>>>> mode (different sets of MII Control/Status registers being used), let's
>>>>>> set "PHY_GBIT_FEATURES" for BCM54616S explicitly.
>>>>>
>>>>> Hi Tao
>>>>>
>>>>> What exactly does it get wrong?
>>>>>
>>>>> Thanks
>>>>> Andrew
>>>>
>>>> Hi Andrew,
>>>>
>>>> BCM54616S is set to RGMII-Fiber (1000Base-X) mode on my platform, and none
>>>> of the features (1000BaseT/100BaseT/10BaseT) can be detected by
>>>> genphy_read_abilities(), because the PHY only reports 1000BaseX_Full|Half
>>>> ability in this mode.
>>>>
>>> Are you going to use the PHY in copper or fibre mode?
>>> In case you use fibre mode, why do you need the copper modes set as
>>> supported?
>>> Or does the PHY just start in fibre mode and you want to switch it to
>>> copper mode?
>>
>> Hi Heiner,
>>
>> The phy starts in fiber mode and that's the mode I want.
>> My observation is: phydev->link is always 0 (Link status bit is never set in
>> MII_BMSR) by using dynamic ability detection on my machine. I checked
>> phydev->supported and it's set to "AutoNeg | TP | MII | Pause | Asym_Pause"
>> by dynamic ability detection. Is it normal/expected? Or maybe the fix should
>> go to different places? Thank you for your help.
>>
>
> Not sure whether you stated already which kernel version you're using.
> There's a brand-new extension to auto-detect 1000BaseX:
> f30e33bcdab9 ("net: phy: Add more 1000BaseX support detection")
> It's included in the 5.3-rc series.
I'm running kernel 5.2.0. Thank you for the sharing and I didn't know the
patch. Let me check it out.
> If a feature can be read from a vendor-specific register only,
> then the preferred way is: Implement callback get_features in
> the PHY driver, call genphy_read_abilities for the basic features
> and complement it with reading the vendor-specific register(s).
Got it. Let me update my code and will come back soon.
Thanks,
Tao
