This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.
First implementation was doing on IIO[1] but after comments i move on thermal
framework.
Formulas and calibration values come from amlogic.
Dependencies :
- patch 3: depends on Neil's patchs :
- missing dwc2 phy-names[1]
- rework on G12 DT[2]
[1]
https://lore.kernel.org/linux-amlogic/[email protected]/
[2]
https://lore.kernel.org/linux-amlogic/[email protected]/
[3]
https://lore.kernel.org/linux-amlogic/[email protected]/
Guillaume La Roque (6):
dt-bindings: thermal: Add DT bindings documentation for Amlogic
Thermal
thermal: amlogic: Add thermal driver to support G12 SoCs
arm64: dts: amlogic: g12: add temperature sensor
arm64: dts: meson: sei510: Add minimal thermal zone
arm64: dts: amlogic: odroid-n2: add minimal thermal zone
MAINTAINERS: add entry for Amlogic Thermal driver
.../bindings/thermal/amlogic,thermal.yaml | 58 +++
MAINTAINERS | 9 +
.../boot/dts/amlogic/meson-g12-common.dtsi | 22 ++
.../boot/dts/amlogic/meson-g12a-sei510.dts | 13 +
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 13 +
drivers/thermal/Kconfig | 12 +-
drivers/thermal/Makefile | 1 +
drivers/thermal/amlogic_thermal.c | 335 ++++++++++++++++++
8 files changed, 462 insertions(+), 1 deletion(-)
create mode 100644
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
create mode 100644 drivers/thermal/amlogic_thermal.c
--
2.17.1
