From: Thor Thayer <thor.tha...@linux.intel.com>
Add Stratix10 specific functions that use a credit mechanism
to throttle data to the CvP FIFOs. Add a private structure
with function pointers for V1 vs V2 functions.
Signed-off-by: Thor Thayer <thor.tha...@linux.intel.com>
---
v2 Remove inline function declaration
Reverse Christmas Tree format for local variables
Remove mask from credit calculation
Add commment for the delay(1) function in wait_for_credit()
v3 Fix return code of abstraction function
Move reset of current_credit_byte to clear_state().
Check return code of credit register read in wait_for_credit()
Check return code of clear_state read/write register.
v4 Implement changes suggested by maintainer.
Rename delta_credit to space
Simplify credit do-while loop.
Change from udelay() to usleep_range()
Remove NULL initialization from private structure
Use name for Version1 offsets
Change current_credit_byte to u32 sent_packets.
Changes to Kconfig title and description to support Stratix10.
---
drivers/fpga/Kconfig | 6 +-
drivers/fpga/altera-cvp.c | 187 ++++++++++++++++++++++++++++++++++++++++++----
2 files changed, 176 insertions(+), 17 deletions(-)
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 474f304ec109..f50956ec1300 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -45,11 +45,11 @@ config FPGA_MGR_ALTERA_PS_SPI
using the passive serial interface over SPI.
config FPGA_MGR_ALTERA_CVP
- tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
+ tristate "Altera CvP FPGA Manager"
depends on PCI
help
- FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
- and Arria 10 Altera FPGAs using the CvP interface over PCIe.
+ FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
+ Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 3b8386fd32e7..4e0edb60bfba 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -43,16 +43,34 @@
#define VSE_CVP_PROG_CTRL 0x2c /* 32bit */
#define VSE_CVP_PROG_CTRL_CONFIG BIT(0)
#define VSE_CVP_PROG_CTRL_START_XFER BIT(1)
+#define VSE_CVP_PROG_CTRL_MASK GENMASK(1, 0)
#define VSE_UNCOR_ERR_STATUS 0x34 /* 32bit */
#define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */
+#define V1_VSEC_OFFSET 0x200 /* Vendor Specific Offset V1 */
+/* V2 Defines */
+#define VSE_CVP_TX_CREDITS 0x49 /* 8bit */
+
+#define V2_CREDIT_TIMEOUT_US 20000
+#define V2_CHECK_CREDIT_US 10
+#define V2_POLL_TIMEOUT_US 1000000
+#define V2_USER_TIMEOUT_US 500000
+
+#define V1_POLL_TIMEOUT_US 10
+
#define DRV_NAME "altera-cvp"
#define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager"
+/* Write block sizes */
+#define ALTERA_CVP_V1_SIZE 4
+#define ALTERA_CVP_V2_SIZE 4096
+
/* Optional CvP config error status check for debugging */
static bool altera_cvp_chkcfg;
+struct cvp_priv;
+
struct altera_cvp_conf {
struct fpga_manager *mgr;
struct pci_dev *pci_dev;
@@ -61,9 +79,27 @@ struct altera_cvp_conf {
u32 data);
char mgr_name[64];
u8 numclks;
+ u32 sent_packets;
u32 vsec_offset;
+ const struct cvp_priv *priv;
};
+struct cvp_priv {
+ void (*switch_clk)(struct altera_cvp_conf *conf);
+ int (*clear_state)(struct altera_cvp_conf *conf);
+ int (*wait_credit)(struct fpga_manager *mgr, u32 blocks);
+ size_t block_size;
+ int poll_time_us;
+ int user_time_us;
+};
+
+static int altera_read_config_byte(struct altera_cvp_conf *conf,
+ int where, u8 *val)
+{
+ return pci_read_config_byte(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
static int altera_read_config_dword(struct altera_cvp_conf *conf,
int where, u32 *val)
{
@@ -159,6 +195,73 @@ static int altera_cvp_chk_error(struct fpga_manager *mgr,
size_t bytes)
return 0;
}
+/*
+ * CvP Version2 Functions
+ * Recent Intel FPGAs use a credit mechanism to throttle incoming
+ * bitstreams and a different method of clearing the state.
+ */
+
+static int altera_cvp_v2_clear_state(struct altera_cvp_conf *conf)
+{
+ u32 val;
+ int ret;
+
+ /* Clear the START_XFER and CVP_CONFIG bits */
+ ret = altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error reading CVP Program Control Register\n");
+ return ret;
+ }
+
+ val &= ~VSE_CVP_PROG_CTRL_MASK;
+ ret = altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error writing CVP Program Control Register\n");
+ return ret;
+ }
+
+ return altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+ conf->priv->poll_time_us);
+}
+
+static int altera_cvp_v2_wait_for_credit(struct fpga_manager *mgr,
+ u32 blocks)
+{
+ u32 timeout = V2_CREDIT_TIMEOUT_US / V2_CHECK_CREDIT_US;
+ struct altera_cvp_conf *conf = mgr->priv;
+ int ret;
+ u8 val;
+
+ do {
+ ret = altera_read_config_byte(conf, VSE_CVP_TX_CREDITS, &val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error reading CVP Credit Register\n");
+ return ret;
+ }
+
+ /* Return if there is space in FIFO */
+ if (val - (u8)conf->sent_packets)
+ return 0;
+
+ ret = altera_cvp_chk_error(mgr, blocks * ALTERA_CVP_V2_SIZE);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "CE Bit error credit reg[0x%x]:sent[0x%x]\n",
+ val, conf->sent_packets);
+ return -EAGAIN;
+ }
+
+ /* Limit the check credit byte traffic */
+ usleep_range(V2_CHECK_CREDIT_US, V2_CHECK_CREDIT_US + 1);
+ } while (timeout--);
+
+ dev_err(&conf->pci_dev->dev, "Timeout waiting for credit\n");
+ return -ETIMEDOUT;
+}
+
static int altera_cvp_send_block(struct altera_cvp_conf *conf,
const u32 *data, size_t len)
{
@@ -200,10 +303,12 @@ static int altera_cvp_teardown(struct fpga_manager *mgr,
* - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
* writes to the HIP
*/
- altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
- ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
+ ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+ conf->priv->poll_time_us);
if (ret)
dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
@@ -265,7 +370,18 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
* STEP 3
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
- altera_cvp_dummy_write(conf);
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
+
+ if (conf->priv->clear_state) {
+ ret = conf->priv->clear_state(conf);
+ if (ret) {
+ dev_err(&mgr->dev, "Problem clearing out state\n");
+ return ret;
+ }
+ }
+
+ conf->sent_packets = 0;
/* STEP 4 - set CVP_CONFIG bit */
altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
@@ -273,9 +389,10 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
val |= VSE_CVP_PROG_CTRL_CONFIG;
altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
- /* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
+ /* STEP 5 - poll CVP_CONFIG READY for 1 with timeout */
ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
- VSE_CVP_STATUS_CFG_RDY, 10);
+ VSE_CVP_STATUS_CFG_RDY,
+ conf->priv->poll_time_us);
if (ret) {
dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
return ret;
@@ -285,7 +402,16 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
* STEP 6
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
- altera_cvp_dummy_write(conf);
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
+
+ if (altera_cvp_chkcfg) {
+ ret = altera_cvp_chk_error(mgr, 0);
+ if (ret) {
+ dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
+ return ret;
+ }
+ }
/* STEP 7 - set START_XFER */
altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
@@ -293,11 +419,12 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
- altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
- val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
- val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
- altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
-
+ if (conf->priv->switch_clk) {
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
+ val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+ val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
+ }
return 0;
}
@@ -315,11 +442,22 @@ static int altera_cvp_write(struct fpga_manager *mgr,
const char *buf,
done = 0;
while (remaining) {
- len = min(sizeof(u32), remaining);
+ /* Use credit throttling if available */
+ if (conf->priv->wait_credit) {
+ status = conf->priv->wait_credit(mgr, done);
+ if (status) {
+ dev_err(&conf->pci_dev->dev,
+ "Wait Credit ERR: 0x%x\n", status);
+ return status;
+ }
+ }
+
+ len = min(conf->priv->block_size, remaining);
altera_cvp_send_block(conf, data, len);
- data++;
+ data += len / sizeof(u32);
done += len;
remaining -= len;
+ conf->sent_packets++;
/*
* STEP 10 (optional) and STEP 11
@@ -369,7 +507,8 @@ static int altera_cvp_write_complete(struct fpga_manager
*mgr,
/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
- ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
+ ret = altera_cvp_wait_status(conf, mask, mask,
+ conf->priv->user_time_us);
if (ret)
dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
@@ -383,6 +522,21 @@ static const struct fpga_manager_ops altera_cvp_ops = {
.write_complete = altera_cvp_write_complete,
};
+static const struct cvp_priv cvp_priv_v1 = {
+ .switch_clk = altera_cvp_dummy_write,
+ .block_size = ALTERA_CVP_V1_SIZE,
+ .poll_time_us = V1_POLL_TIMEOUT_US,
+ .user_time_us = TIMEOUT_US,
+};
+
+static const struct cvp_priv cvp_priv_v2 = {
+ .clear_state = altera_cvp_v2_clear_state,
+ .wait_credit = altera_cvp_v2_wait_for_credit,
+ .block_size = ALTERA_CVP_V2_SIZE,
+ .poll_time_us = V2_POLL_TIMEOUT_US,
+ .user_time_us = V2_USER_TIMEOUT_US,
+};
+
static ssize_t chkcfg_show(struct device_driver *dev, char *buf)
{
return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
@@ -484,6 +638,11 @@ static int altera_cvp_probe(struct pci_dev *pdev,
conf->pci_dev = pdev;
conf->write_data = altera_cvp_write_data_iomem;
+ if (conf->vsec_offset == V1_VSEC_OFFSET)
+ conf->priv = &cvp_priv_v1;
+ else
+ conf->priv = &cvp_priv_v2;
+
conf->map = pci_iomap(pdev, CVP_BAR, 0);
if (!conf->map) {
dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
--
2.7.4
