[PATCH] ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board

[Yannick Fertré]

The ltdc pinctrl must be in the display controller node and
not in the peripheral node (hdmi bridge).

Signed-off-by: Yannick Fertré <yannick.fer...@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts 
b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index f3f0e37..1285cfc 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -99,9 +99,6 @@
                reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
                interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
                interrupt-parent = <&gpiog>;
-               pinctrl-names = "default", "sleep";
-               pinctrl-0 = <&ltdc_pins_a>;
-               pinctrl-1 = <&ltdc_pins_sleep_a>;
                status = "okay";
 
                ports {
@@ -276,6 +273,9 @@
 };
 
 &ltdc {
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&ltdc_pins_a>;
+       pinctrl-1 = <&ltdc_pins_sleep_a>;
        status = "okay";
 
        port {
-- 
2.7.4