On Fri, Jul 05, 2019 at 12:57:56PM +0300, Mika Westerberg wrote: > There are two ways to mark a port as unimplemented. Typical way is to > return port type as TB_TYPE_INACTIVE when its config space is read. > Alternatively if the port is not physically present (such as ports 10 > and 11 in ICL) reading from port config space returns > TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails > out from adding the switch if it receives any error during port > inititialization which is wrong. > > Handle this properly and just leave the port as TB_TYPE_INACTIVE before > continuing to the next port.
Your patch may also cause this snippet in eeprom.c to become obsolete: /* Port 5 is inaccessible on this gen 1 controller */ if (sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE) sw->ports[5].disabled = true; To verify this hypothesis, one needs to comment out the call to tb_drom_copy_efi() as well as the above-quoted snippet and boot on a Mac with Light Ridge. The driver should hit an error without your patch and it may work correctly with your patch. Thanks, Lukas