From: Suganath Prabu <suganath-prabu.subram...@broadcom.com>
commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.
Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.
E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.
Driver will set 63-bit DMA mask to ensure the above address will not be
used.
Cc: <sta...@vger.kernel.org> # 4.19.63
Signed-off-by: Suganath Prabu <suganath-prabu.subram...@broadcom.com>
Reviewed-by: Christoph Hellwig <h...@lst.de>
Signed-off-by: Martin K. Petersen <martin.peter...@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2565,12 +2565,14 @@ _base_config_dma_addressing(struct MPT3S
{
struct sysinfo s;
u64 consistent_dma_mask;
+ /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+ int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
if (ioc->is_mcpu_endpoint)
goto try_32bit;
if (ioc->dma_mask)
- consistent_dma_mask = DMA_BIT_MASK(64);
+ consistent_dma_mask = DMA_BIT_MASK(dma_mask);
else
consistent_dma_mask = DMA_BIT_MASK(32);
@@ -2578,11 +2580,11 @@ _base_config_dma_addressing(struct MPT3S
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
if ((required_mask > DMA_BIT_MASK(32)) &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(dma_mask)) &&
!pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
- ioc->dma_mask = 64;
+ ioc->dma_mask = dma_mask;
goto out;
}
}
@@ -2609,7 +2611,7 @@ static int
_base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
struct pci_dev *pdev)
{
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) {
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
return -ENODEV;
}
@@ -4545,7 +4547,7 @@ _base_allocate_memory_pools(struct MPT3S
total_sz += sz;
} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
- if (ioc->dma_mask == 64) {
+ if (ioc->dma_mask > 32) {
if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
pr_warn(MPT3SAS_FMT
"no suitable consistent DMA mask for %s\n",
