On Wed, Aug 07, 2019 at 10:17:50AM +0200, Philipp Zabel wrote:
> On Tue, 2019-08-06 at 18:02 +0100, Sudeep Holla wrote:
> > SCMIv2.0 adds a new Reset Management Protocol to manage various reset
> > states a given device or domain can enter. Device(s) that can be
> > collectively reset through a common reset signal constitute a reset
> > domain for the firmware.
> >
> > A reset domain can be reset autonomously or explicitly through assertion
> > and de-assertion of the signal. When autonomous reset is chosen, the
> > firmware is responsible for taking the necessary steps to reset the
> > domain and to subsequently bring it out of reset. When explicit reset is
> > chosen, the caller has to specifically assert and then de-assert the
> > reset signal by issuing two separate RESET commands.
> >
> > Add the basic SCMI reset infrastructure that can be used by Linux
> > reset controller driver.
> >
> > Cc: Philipp Zabel <p.za...@pengutronix.de>
> > Signed-off-by: Sudeep Holla <sudeep.ho...@arm.com>
> > ---
> > drivers/firmware/arm_scmi/Makefile | 2 +-
> > drivers/firmware/arm_scmi/reset.c | 231 +++++++++++++++++++++++++++++
> > include/linux/scmi_protocol.h | 26 ++++
> > 3 files changed, 258 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/firmware/arm_scmi/reset.c
> >
> > diff --git a/drivers/firmware/arm_scmi/Makefile
> > b/drivers/firmware/arm_scmi/Makefile
> > index c47d28d556b6..5f298f00a82e 100644
> > --- a/drivers/firmware/arm_scmi/Makefile
> > +++ b/drivers/firmware/arm_scmi/Makefile
> > @@ -2,5 +2,5 @@
> > obj-y = scmi-bus.o scmi-driver.o scmi-protocols.o
> > scmi-bus-y = bus.o
> > scmi-driver-y = driver.o
> > -scmi-protocols-y = base.o clock.o perf.o power.o sensors.o
> > +scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
> > obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
> > diff --git a/drivers/firmware/arm_scmi/reset.c
> > b/drivers/firmware/arm_scmi/reset.c
> > new file mode 100644
> > index 000000000000..11cb8b5ccf34
> > --- /dev/null
> > +++ b/drivers/firmware/arm_scmi/reset.c
> > @@ -0,0 +1,231 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * System Control and Management Interface (SCMI) Reset Protocol
> > + *
> > + * Copyright (C) 2019 ARM Ltd.
> > + */
> > +
> > +#include "common.h"
> > +
> > +enum scmi_reset_protocol_cmd {
> > + RESET_DOMAIN_ATTRIBUTES = 0x3,
> > + RESET = 0x4,
> > + RESET_NOTIFY = 0x5,
> > +};
> > +
> > +enum scmi_reset_protocol_notify {
> > + RESET_ISSUED = 0x0,
> > +};
> > +
> > +#define NUM_RESET_DOMAIN_MASK 0xffff
> > +#define RESET_NOTIFY_ENABLE BIT(0)
> > +
> > +struct scmi_msg_resp_reset_domain_attributes {
> > + __le32 attributes;
> > +#define SUPPORTS_ASYNC_RESET(x) ((x) & BIT(31))
> > +#define SUPPORTS_NOTIFY_RESET(x) ((x) & BIT(30))
> > + __le32 latency;
> > + u8 name[SCMI_MAX_STR_SIZE];
> > +};
> > +
> > +struct scmi_msg_reset_domain_reset {
> > + __le32 domain_id;
> > + __le32 flags;
> > +#define AUTONOMOUS_RESET BIT(0)
> > +#define EXPLICIT_RESET_ASSERT BIT(1)
> > +#define ASYNCHRONOUS_RESET BIT(2)
> > + __le32 reset_state;
> > +#define ARCH_RESET_TYPE BIT(31)
> > +#define COLD_RESET_STATE BIT(0)
> > +#define ARCH_COLD_RESET (ARCH_RESET_TYPE | COLD_RESET_STATE)
> > +};
> > +
> > +struct reset_dom_info {
> > + bool async_reset;
> > + bool reset_notify;
> > + u32 latency_us;
> > + char name[SCMI_MAX_STR_SIZE];
> > +};
> > +
> > +struct scmi_reset_info {
> > + int num_domains;
> > + struct reset_dom_info *dom_info;
> > +};
> > +
> > +static int scmi_reset_attributes_get(const struct scmi_handle *handle,
> > + struct scmi_reset_info *pi)
> > +{
> > + int ret;
> > + struct scmi_xfer *t;
> > + u32 *attr;
> > +
> > + ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
> > + SCMI_PROTOCOL_RESET, 0, sizeof(*attr), &t);
> > + if (ret)
> > + return ret;
> > +
> > + attr = t->rx.buf;
> > +
> > + ret = scmi_do_xfer(handle, t);
> > + if (!ret)
> > + pi->num_domains = le32_to_cpu(*attr) & NUM_RESET_DOMAIN_MASK;
> > +
> > + scmi_xfer_put(handle, t);
> > + return ret;
> > +}
> > +
> > +static int
> > +scmi_reset_domain_attributes_get(const struct scmi_handle *handle, u32
> > domain,
> > + struct reset_dom_info *dom_info)
> > +{
> > + int ret;
> > + struct scmi_xfer *t;
> > + struct scmi_msg_resp_reset_domain_attributes *attr;
> > +
> > + ret = scmi_xfer_get_init(handle, RESET_DOMAIN_ATTRIBUTES,
> > + SCMI_PROTOCOL_RESET, sizeof(domain),
> > + sizeof(*attr), &t);
> > + if (ret)
> > + return ret;
> > +
> > + *(__le32 *)t->tx.buf = cpu_to_le32(domain);
>
> Should this use
> put_unaligned_le32(domain, t->tx.buf);
> ? Either way,
>
Ah, new function to me. I will take a look, may need more place to fix.
> Reviewed-by: Philipp Zabel <p.za...@pengutronix.de>
>
Thanks,
Sudeep
