On Wed, 2019-08-07 at 12:51 +0200, Uwe Kleine-König wrote:
> On Wed, Aug 07, 2019 at 08:26:23AM +0000, Philippe Schenker wrote:
> > Add the phy-node and mdio bus to the fec-node, represented as is on
> > hardware.
> > This commit includes micrel,led-mode that is set to the default
> > value, prepared for someone who wants to change this.
> > 
> > Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
> > ---
> > 
> > Changes in v3: None
> > Changes in v2: None
> > 
> >  arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > index 1beac22266ed..019dda6b88ad 100644
> > --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > @@ -140,7 +140,18 @@
> >     pinctrl-names = "default";
> >     pinctrl-0 = <&pinctrl_enet>;
> >     phy-mode = "rmii";
> > +   phy-handle = <&ethphy>;
> >     status = "okay";
> > +
> > +   mdio {
> > +           #address-cells = <1>;
> > +           #size-cells = <0>;
> > +
> > +           ethphy: ethernet-phy@0 {
> > +                   reg = <0>;
> > +                   micrel,led-mode = <0>;
> 
> Doesn't that need a compatible entry to be actually used?
> 
> Best regards
> Uwe

Hi Uwe and thanks for pointing this out. I just tried it and it works
fine without the compatible.

Philippe

> > 

Reply via email to