From: Andres Salomon <[email protected]> On mmp3, there's an extra set of ICU registers (ICU2) that handle interrupts on the extra cores. When masking off interrupts on MP1, these should be masked as well.
We add a new interrupt controller via device tree to identify when we're looking at an mmp3 machine via compatible field of "marvell,mmp3-intc". [[email protected]: Changed "mrvl,mmp3-intc" compatible strings to "marvell,mmp3-intc". Tidied up the subject line a bit.] Signed-off-by: Andres Salomon <[email protected]> Signed-off-by: Lubomir Rintel <[email protected]> --- arch/arm/mach-mmp/regs-icu.h | 3 +++ drivers/irqchip/irq-mmp.c | 51 ++++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h index 0375d5a7fcb2b..410743d2b4020 100644 --- a/arch/arm/mach-mmp/regs-icu.h +++ b/arch/arm/mach-mmp/regs-icu.h @@ -11,6 +11,9 @@ #define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000) #define ICU_REG(x) (ICU_VIRT_BASE + (x)) +#define ICU2_VIRT_BASE (AXI_VIRT_BASE + 0x84000) +#define ICU2_REG(x) (ICU2_VIRT_BASE + (x)) + #define ICU_INT_CONF(n) ICU_REG((n) << 2) #define ICU_INT_CONF_MASK (0xf) diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c index cd8d2253f56d1..25497c75cc861 100644 --- a/drivers/irqchip/irq-mmp.c +++ b/drivers/irqchip/irq-mmp.c @@ -44,6 +44,7 @@ struct icu_chip_data { unsigned int conf_enable; unsigned int conf_disable; unsigned int conf_mask; + unsigned int conf2_mask; unsigned int clr_mfp_irq_base; unsigned int clr_mfp_hwirq; struct irq_domain *domain; @@ -53,9 +54,11 @@ struct mmp_intc_conf { unsigned int conf_enable; unsigned int conf_disable; unsigned int conf_mask; + unsigned int conf2_mask; }; static void __iomem *mmp_icu_base; +static void __iomem *mmp_icu2_base; static struct icu_chip_data icu_data[MAX_ICU_NR]; static int max_icu_nr; @@ -98,6 +101,16 @@ static void icu_mask_irq(struct irq_data *d) r &= ~data->conf_mask; r |= data->conf_disable; writel_relaxed(r, mmp_icu_base + (hwirq << 2)); + + if (data->conf2_mask) { + /* + * ICU1 (above) only controls PJ4 MP1; if using SMP, + * we need to also mask the MP2 and MM cores via ICU2. + */ + r = readl_relaxed(mmp_icu2_base + (hwirq << 2)); + r &= ~data->conf2_mask; + writel_relaxed(r, mmp_icu2_base + (hwirq << 2)); + } } else { r = readl_relaxed(data->reg_mask) | (1 << hwirq); writel_relaxed(r, data->reg_mask); @@ -201,6 +214,14 @@ static const struct mmp_intc_conf mmp2_conf = { MMP2_ICU_INT_ROUTE_PJ4_FIQ, }; +static struct mmp_intc_conf mmp3_conf = { + .conf_enable = 0x20, + .conf_disable = 0x0, + .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ | + MMP2_ICU_INT_ROUTE_PJ4_FIQ, + .conf2_mask = 0xf0, +}; + static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs) { int hwirq; @@ -364,6 +385,14 @@ static int __init mmp_init_bases(struct device_node *node) pr_err("Failed to get interrupt controller register\n"); return -ENOMEM; } + if (of_device_is_compatible(node, "marvell,mmp3-intc")) { + mmp_icu2_base = of_iomap(node, 1); + if (!mmp_icu2_base) { + pr_err("Failed to get interrupt controller register #2\n"); + iounmap(mmp_icu_base); + return -ENOMEM; + } + } icu_data[0].virq_base = 0; icu_data[0].domain = irq_domain_add_linear(node, nr_irqs, @@ -386,6 +415,8 @@ static int __init mmp_init_bases(struct device_node *node) irq_dispose_mapping(icu_data[0].virq_base + i); } irq_domain_remove(icu_data[0].domain); + if (of_device_is_compatible(node, "marvell,mmp3-intc")) + iounmap(mmp_icu2_base); iounmap(mmp_icu_base); return -EINVAL; } @@ -428,6 +459,26 @@ static int __init mmp2_of_init(struct device_node *node, } IRQCHIP_DECLARE(mmp2_intc, "mrvl,mmp2-intc", mmp2_of_init); +static int __init mmp3_of_init(struct device_node *node, + struct device_node *parent) +{ + int ret; + + ret = mmp_init_bases(node); + if (ret < 0) + return ret; + + icu_data[0].conf_enable = mmp3_conf.conf_enable; + icu_data[0].conf_disable = mmp3_conf.conf_disable; + icu_data[0].conf_mask = mmp3_conf.conf_mask; + icu_data[0].conf2_mask = mmp3_conf.conf2_mask; + irq_set_default_host(icu_data[0].domain); + set_handle_irq(mmp2_handle_irq); + max_icu_nr = 1; + return 0; +} +IRQCHIP_DECLARE(mmp3_intc, "marvell,mmp3-intc", mmp3_of_init); + static int __init mmp2_mux_of_init(struct device_node *node, struct device_node *parent) { -- 2.21.0
