On Mon, Aug 05, 2019 at 02:57:00PM +0800, Hui Song wrote:
> From: Song Hui <[email protected]>
> 
> Update the nodes to include little-endian
> property to be consistent with the hardware.
> 
> Signed-off-by: Song Hui <[email protected]>

@Leo, looks good?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi 
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index aef5b06..7ccbbfc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -277,33 +277,36 @@
>               };
>  
>               gpio1: gpio@2300000 {
> -                     compatible = "fsl,qoriq-gpio";
> +                     compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
>                       reg = <0x0 0x2300000 0x0 0x10000>;
>                       interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>                       gpio-controller;
>                       #gpio-cells = <2>;
>                       interrupt-controller;
>                       #interrupt-cells = <2>;
> +                     little-endian;
>               };
>  
>               gpio2: gpio@2310000 {
> -                     compatible = "fsl,qoriq-gpio";
> +                     compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
>                       reg = <0x0 0x2310000 0x0 0x10000>;
>                       interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>                       gpio-controller;
>                       #gpio-cells = <2>;
>                       interrupt-controller;
>                       #interrupt-cells = <2>;
> +                     little-endian;
>               };
>  
>               gpio3: gpio@2320000 {
> -                     compatible = "fsl,qoriq-gpio";
> +                     compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
>                       reg = <0x0 0x2320000 0x0 0x10000>;
>                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>                       gpio-controller;
>                       #gpio-cells = <2>;
>                       interrupt-controller;
>                       #interrupt-cells = <2>;
> +                     little-endian;
>               };
>  
>               usb0: usb@3100000 {
> -- 
> 2.9.5
> 

Reply via email to