On Tue, Aug 13, 2019 at 12:11:44PM -0700, Matthias Kaehlcke wrote:
> The LED behavior of some Ethernet PHYs is configurable. Add an
> optional 'leds' subnode with a child node for each LED to be
> configured. The binding aims to be compatible with the common
> LED binding (see devicetree/bindings/leds/common.txt).
>
> A LED can be configured to be:
>
> - 'on' when a link is active, some PHYs allow configuration for
> certain link speeds
> speeds
> - 'off'
> - blink on RX/TX activity, some PHYs allow configuration for
> certain link speeds
>
> For the configuration to be effective it needs to be supported by
> the hardware and the corresponding PHY driver.
>
> Suggested-by: Andrew Lunn <and...@lunn.ch>
> Signed-off-by: Matthias Kaehlcke <m...@chromium.org>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Andrew
