This patch will add a system calibration attribute for each channel. Using
this option the user will have the ability to calibrate each channel for
zero scale and full scale. It uses the iio_chan_spec_ext_info and IIO_ENUM
to implement the functionality.

Signed-off-by: Mircea Caprioru <mircea.capri...@analog.com>
---
Changelog V2:
- no changes here

Changelog V3:
- no changes here

 drivers/staging/iio/adc/ad7192.c | 55 +++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index d58ce08f3693..731072830f30 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -155,6 +155,11 @@
  * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
  */
 
+enum {
+   AD7192_SYSCALIB_ZERO_SCALE,
+   AD7192_SYSCALIB_FULL_SCALE,
+};
+
 struct ad7192_state {
        struct regulator                *avdd;
        struct regulator                *dvdd;
@@ -169,10 +174,56 @@ struct ad7192_state {
        u8                              devid;
        u8                              clock_sel;
        struct mutex                    lock;   /* protect sensor state */
+       u8                              syscalib_mode[8];
 
        struct ad_sigma_delta           sd;
 };
 
+static const char * const ad7192_syscalib_modes[] = {
+       [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale",
+       [AD7192_SYSCALIB_FULL_SCALE] = "full_scale",
+};
+
+static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev,
+                                   const struct iio_chan_spec *chan,
+                                   unsigned int mode)
+{
+       struct ad7192_state *st = iio_priv(indio_dev);
+       int ret;
+
+       st->syscalib_mode[chan->channel] = mode;
+
+       if (mode == AD7192_SYSCALIB_ZERO_SCALE)
+               ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO,
+                                     chan->address);
+       else
+               ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL,
+                                     chan->address);
+
+       return ret;
+}
+
+static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev,
+                                   const struct iio_chan_spec *chan)
+{
+       struct ad7192_state *st = iio_priv(indio_dev);
+
+       return st->syscalib_mode[chan->channel];
+}
+
+static const struct iio_enum ad7192_syscalib_mode_enum = {
+       .items = ad7192_syscalib_modes,
+       .num_items = ARRAY_SIZE(ad7192_syscalib_modes),
+       .set = ad7192_set_syscalib_mode,
+       .get = ad7192_get_syscalib_mode
+};
+
+static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = {
+       IIO_ENUM("system_calibration", IIO_SEPARATE, 
&ad7192_syscalib_mode_enum),
+       IIO_ENUM_AVAILABLE("system_calibration", &ad7192_syscalib_mode_enum),
+       {}
+};
+
 static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd)
 {
        return container_of(sd, struct ad7192_state, sd);
@@ -769,9 +820,11 @@ static int ad7192_channels_config(struct iio_dev 
*indio_dev)
                *chan = channels[i];
                chan->info_mask_shared_by_all |=
                        BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY);
-               if (chan->type != IIO_TEMP)
+               if (chan->type != IIO_TEMP) {
                        chan->info_mask_shared_by_type_available |=
                                BIT(IIO_CHAN_INFO_SCALE);
+                       chan->ext_info = ad7192_calibsys_ext_info;
+               }
                chan++;
        }
 
-- 
2.17.1

Reply via email to