[PATCH 07/22] arm64: dts: qcom: pm8150: Add pon and rtc nodes

[Vinod Koul]

PM8150 PMIC contains pon and rtc devices so add nodes for these.

Signed-off-by: Vinod Koul <vk...@kernel.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi 
b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index b533e254a203..2cb727ce30eb 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -2,6 +2,7 @@
 // Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
 // Copyright (c) 2019, Linaro Limited
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
@@ -12,6 +13,25 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
+               pon: pon@800 {
+                       compatible = "qcom,pm8916-pon";
+                       reg = <0x0800>;
+                       pwrkey {
+                               compatible = "qcom,pm8941-pwrkey";
+                               interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                               linux,code = <KEY_POWER>;
+                       };
+               };
+
+               rtc@6000 {
+                       compatible = "qcom,pm8941-rtc";
+                       reg = <0x6000>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+               };
+
                pm8150_gpios: gpio@c000 {
                        compatible = "qcom,pm8150-gpio";
                        reg = <0xc000>;
-- 
2.20.1