Hi Jacopo,

Thank you for the patch.

On Wed, Aug 14, 2019 at 10:28:12PM +0200, Jacopo Mondi wrote:
> Add documentation for the V4L2_CID_LOCATION camera control. The newly
> added read-only control reports the camera device mounting position.
> 
> Signed-off-by: Jacopo Mondi <jac...@jmondi.org>
> ---
>  .../media/uapi/v4l/ext-ctrls-camera.rst       | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/Documentation/media/uapi/v4l/ext-ctrls-camera.rst 
> b/Documentation/media/uapi/v4l/ext-ctrls-camera.rst
> index 51c1d5c9eb00..fc0a02eee6d4 100644
> --- a/Documentation/media/uapi/v4l/ext-ctrls-camera.rst
> +++ b/Documentation/media/uapi/v4l/ext-ctrls-camera.rst
> @@ -510,6 +510,29 @@ enum v4l2_scene_mode -
>      value down. A value of zero stops the motion if one is in progress
>      and has no effect otherwise.
> 
> +``V4L2_CID_LOCATION (integer)``

Maybe V4L2_CID_CAMERA_SENSOR_LOCATION ? Same for the values below.

> +    This read-only control describes the camera location by reporting its

Here too I would mention camera sensor instead of just camera (or
possibly imaging sensor).

> +    mounting position on the device where the camera is installed. This
> +    control is particularly meaningful for devices which have a well defined
> +    orientation, such as phones, laptops and portable devices as the camera
> +    location is expressed as a position relative to the device intended
> +    usage position. In example, a camera installed on the user-facing side
> +    of a phone device is said to be installed in the ``V4L2_LOCATION_FRONT``
> +    position.

The DT bindings could use such an example :-) I would extend this to
tablets and laptops.

> +
> +
> +

Do we need three blank lines ?

> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_LOCATION_FRONT``
> +      - The camera device is located on the front side of the device.
> +    * - ``V4L2_LOCATION_BACK``
> +      - The camera device is located on the back side of the device.
> +
> +
> +
>  .. [#f1]
>     This control may be changed to a menu control in the future, if more
>     options are required.

-- 
Regards,

Laurent Pinchart

Reply via email to