On 8/15/19 4:15 PM, Vladimir Oltean wrote: > Hi Tao, > > On Fri, 16 Aug 2019 at 02:13, Tao Ren <tao...@fb.com> wrote: >> >> Hi Andrew / Florian / Heiner / Vladimir, >> >> Any further suggestions on the patch series? >> >> >> Thanks, >> >> Tao >> >> On 8/11/19 4:40 PM, Tao Ren wrote: >>> The BCM54616S PHY cannot work properly in RGMII->1000Base-X mode, mainly >>> because genphy functions are designed for copper links, and 1000Base-X >>> (clause 37) auto negotiation needs to be handled differently. >>> >>> This patch enables 1000Base-X support for BCM54616S by customizing 3 >>> driver callbacks, and it's verified to be working on Facebook CMM BMC >>> platform (RGMII->1000Base-KX): >>> >>> - probe: probe callback detects PHY's operation mode based on >>> INTERF_SEL[1:0] pins and 1000X/100FX selection bit in SerDES 100-FX >>> Control register. >>> >>> - config_aneg: calls genphy_c37_config_aneg when the PHY is running in >>> 1000Base-X mode; otherwise, genphy_config_aneg will be called. >>> >>> - read_status: calls genphy_c37_read_status when the PHY is running in >>> 1000Base-X mode; otherwise, genphy_read_status will be called. >>> >>> Note: BCM54616S PHY can also be configured in RGMII->100Base-FX mode, and >>> 100Base-FX support is not available as of now. >>> >>> Signed-off-by: Tao Ren <tao...@fb.com> >>> --- > > The patchset looks good to me. However I am not a maintainer. > If it helps, > > Acked-by: Vladimir Oltean <olte...@gmail.com>
Thank you Vladimir! Cheers, Tao