Enable i.MX8MM cpu-idle using generic ARM cpu-idle driver, 2 states
are supported, details as below:
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/name
WFI
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/usage
3973
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/name
cpu-pd-wait
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/usage
6647
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
Changes since V5:
- improve state1 idle name to better match PSCI doc;
- remove wakeup-latency-us property as it is NOT necessary when
entry-latency-us/exit-latency-us
exist.
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 94433c53..9b2dc12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -44,6 +44,19 @@
#address-cells = <1>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "psci";
+
+ cpu_pd_wait: cpu-pd-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010033>;
+ local-timer-stop;
+ entry-latency-us = <1000>;
+ exit-latency-us = <700>;
+ min-residency-us = <2700>;
+ };
+ };
+
A53_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
@@ -56,6 +69,7 @@
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_1: cpu@1 {
@@ -68,6 +82,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_2: cpu@2 {
@@ -80,6 +95,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_3: cpu@3 {
@@ -92,6 +108,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
};
A53_L2: l2-cache0 {
--
2.7.4
