[PATCH V2 1/6] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support

[Anson Huang]

Enable i2c1 on i.MX8MN DDR4 EVK board.

Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
No changes.
---
 arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts 
b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 9b2c172..5fce5b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -50,6 +50,13 @@
                >;
        };
 
+       pinctrl_i2c1: i2c1grp {
+               fsl,pins = <
+                       MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL          0x400001c3
+                       MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA          0x400001c3
+               >;
+       };
+
        pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
                fsl,pins = <
                        MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
@@ -182,6 +189,13 @@
        };
 };
 
+&i2c1 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+};
+
 &snvs_pwrkey {
        status = "okay";
 };
-- 
2.7.4