Hi Rob,
Sorry for late reply.
On Wed, 2019-05-01 at 15:27 -0500, Rob Herring wrote:
> On Tue, Apr 30, 2019 at 04:51:02PM +0800, Henry Chen wrote:
> > Add interconnect provider dt-bindings for MT8183.
> >
> > Signed-off-by: Henry Chen <henryc.c...@mediatek.com>
> > ---
> > .../bindings/interconnect/mtk,mt8183.txt | 24
> > ++++++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> >
> > diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> > b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> > new file mode 100644
> > index 0000000..1cf1841
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> > @@ -0,0 +1,24 @@
> > +Mediatek MT8183 interconnect binding
>
> This should be part of the dvfsrc binding.
ok, will add these into dvfsrc binding.
>
> > +
> > +MT8183 interconnect providers support dram bandwidth requirements. The
> > provider
> > +is able to communicate with the DVFSRC and send the dram bandwidth to it.
> > +Provider nodes must reside within an DVFSRC device node.
> > +
> > +Required properties :
> > +- compatible : shall contain only one of the following:
> > + "mediatek,mt8183-emi-icc"
> > +- #interconnect-cells : should contain 1
> > +
> > +Examples:
> > +
> > +dvfsrc@10012000 {
> > + compatible = "mediatek,mt8183-dvfsrc";
> > + reg = <0 0x10012000 0 0x1000>;
> > + clocks = <&infracfg CLK_INFRA_DVFSRC>;
> > + clock-names = "dvfsrc";
> > + ddr_emi: interconnect {
> > + compatible = "mediatek,mt8183-emi-icc";
> > + #interconnect-cells = <1>;
>
> No need for a child node here. Just move #interconnect-cells to the
> parent.
Ihave tried and it cannot work if move "#interconnect-cells" to the
parent.
The provider nodes must reside within an DVFSRC device node.
>
> Rob
