v1 patchset can be found here: https://lkml.org/lkml/2019/8/15/626
This patch adds basic support for BASE-T1 PHYs in the framework. BASE-T1 PHYs main area of application are automotive and industrial. BASE-T1 is standardized in IEEE 802.3, namely - IEEE 802.3bw: 100BASE-T1 - IEEE 802.3bp 1000BASE-T1 - IEEE 802.3cg: 10BASE-T1L and 10BASE-T1S There are no products which contain BASE-T1 and consumer type PHYs like 1000BASE-T. However, devices exist which combine 100BASE-T1 and 1000BASE-T1 PHYs with auto-negotiation. The intention of this patch is to make use of the existing Clause 45 functions. BASE-T1 adds some additional registers e.g. for aneg control, which follow a similar register layout as the existing devices. The bits which are used in BASE-T1 specific registers are the same as in basic registers, thus the existing functions can be resued, with get_aneg_ctrl() selecting the correct register address. The current version of ethtool has been prepared for 100/1000BASE-T1 and works with this patch. 10BASE-T1 needs to be added to ethtool. The fixed- speed and auto-negotiation functions are extended for 100/1000BASE-T1. For 10BASE-T1S/L, only discovery of ability is added with this patchset. Christian Herber (1): net: phy: Added BASE-T1 PHY support to PHY Subsystem drivers/net/phy/phy-c45.c | 106 +++++++++++++++++++++++++++++++---- drivers/net/phy/phy-core.c | 4 +- drivers/net/phy/phy_device.c | 12 ++++ include/linux/phy.h | 1 + include/uapi/linux/ethtool.h | 2 + include/uapi/linux/mdio.h | 21 +++++++ 6 files changed, 135 insertions(+), 11 deletions(-) -- 2.17.1