Neil Armstrong <narmstr...@baylibre.com> writes: > The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A > SoC Family, with the following changes : > - Cortex-A55 cores instead of A53 > - more power domains, including USB & PCIe > - a neural network co-processor (NNA) > - a CSI input and image processor > - some changes in the audio complex, thus not yet enabled > - new clocks, for NNA, CSI and a clock tree for each CPU Core > > This serie does not add support for NNA, CSI, Audio, USB, Display > or DVFS, it only aligns with the current G12A Support. > > With this serie, the SEI610 Board has supported : > - Default-boot CPU frequency > - Ethernet > - LEDs > - IR > - GPIO Buttons > - eMMC > - SDCard > - SDIO WiFi > - UART Bluetooth > > Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led > would be supported in following patchsets. > > Dependencies: > - g12-common.dtsi from the DVFS patchset at [1] > > Changes from rfc at [2]: > - Removed Power domain patches & display/USB support, will resend separately > - Removed applied AO-CEC patches > - Fixed clk-measure IDs > - Collected reviewed-by tags > > [1] https://patchwork.kernel.org/cover/11025309/ > [2] https://patchwork.kernel.org/cover/11025511/
Series queued for v5.4... > Neil Armstrong (6): > soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs > dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible > soc: amlogic: clk-measure: Add support for SM1 ... these 3 in v5.4/drivers ... > dt-bindings: arm: amlogic: add SM1 bindings > dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings > arm64: dts: add support for SM1 based SEI Robotics SEI610 ... and these 3 in v5.4/dt64 with Rob's tag. Thanks, Kevin
