From: Maxime Ripard <maxime.rip...@bootlin.com>
The CSI controller embedded in the A20 can be supported by our new driver.
Let's add it to our DT.
Signed-off-by: Maxime Ripard <maxime.rip...@bootlin.com>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9ad8e445b240..713c20be8c7a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -376,6 +376,17 @@
num-cs = <1>;
};
+ csi0: csi@1c09000 {
+ compatible = "allwinner,sun7i-a20-csi0";
+ reg = <0x01c09000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
+ <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+ clock-names = "bus", "mod", "isp", "ram";
+ resets = <&ccu RST_CSI0>;
+ status = "disabled";
+ };
+
emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
@@ -775,6 +786,20 @@
};
/omit-if-no-ref/
+ csi0_8bits_pins: csi-8bits-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi0_clk_pin: csi-clk-pin {
+ pins = "PE1";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
--
git-series 0.9.1
